AquaMend Underwater Repair Epoxy Putty, 2 oz. Stick - 88-265-1000

$18.99

IN STOCK

Part # 88-265-1000


Details

Top

Part # 88-265-1000

Dimensions 3-1/2" X 7/8"

Product Description

AquaMend Epoxy Putty Stick is a hand-kneadable, fast-setting, fiberglass-reinforced polymer compound for permanent repairs to many surfaces including fiberglass, concrete, glass, ceramics, metals, wood, and many plastics. This underwater repair epoxy putty comes in a handy "Tootsie-roll®" form with the curing agent encapsulated in the contrasting color base material.

Top

?     Asked on 8/15/2017 by Admir D

HI Can you tell me if I can cover size of dollar bill concrete chip in the pool with water in the pool, meaning working while water is in the pool? Would this hold it ?

A     Answered on 9/15/2017 by InyoPools Product Specialist Stacey M.

Hello, This AquaMend Putty can be applied underwater but the mixing has to be done out of the water.

?     Asked on 7/3/2017 by Jen

We have a leak at the joint going into pump - can this be used on pvc & will it hold under pressure?

A     Answered on 7/3/2017 by InyoPools Product Specialist Joe S.

Good day, this will work on the pressure side. Make sure the Aquamend is fully cured before turning on the pump. 

?     Asked on 6/28/2017 by Kathy

Is the epoxy included? Would this be the only product I would need? Fixing a crack in a fiberglass pool. It is around a jet.

A     Answered on 6/29/2017 by InyoPools Product Specialist Lennox H.

Kathy. You would not need anything else to mix with this epoxy putty, the two parts are included so that you can fix the crack in in your fiberglass surface.

?     Asked on 6/8/2017 by Sherrie

I have a crack in the steps on my inground pool. What color will this be when it sets?

A     Answered on 8/9/2017 by InyoPools Product Specialist Alex V.

Sherrie, It will be an off white color. 

?     Asked on 5/30/2017 by ken

Will this work on the pool steps hard plastic[ inground] pool?

A     Answered on 6/1/2017 by InyoPools Product Specialist Lennox H.

Hi, Ken. This Epoxy Putty can be used on many plastics, fiberglass, and even resin surfaces.

?     Asked on 5/26/2017 by dave

can i use this under water epoxy to fix leak around pool light with out draining the pool water below light?

A     Answered on 5/26/2017 by InyoPools Product Specialist Lennox H.

Hi, Dave. This AquaMend Putty can be applied underwater but the mixing has to be done out of the water.

?     Asked on 2/15/2017 by dan

Hi, I have a skimmer crack 8 inches long in my in ground pool and I read an article from a customer that they used Aqua Mend and it worked. But they did not indicate which epoxy they used, putty or 2 part liquid? My Leak is approximately 1/32 inches wide. I need to purchase something very durable for. Which part number should I use? Besides the epoxy, what about some kind of plate over the crack??? Where can I buy your epoxy in my area, Anaheim, California. I thanks--dan

A     Answered on 2/15/2017 by InyoPools Product Specialist Megan C.

The AquaMend Underwater Repair Epoxy Putty is used for many plastics and other materials. The A+B Epoxy Putty, 7oz, White (9904H) , A+B Epoxy Putty, 15.5oz, Gray (9906K) , or the A+B Epoxy Putty, 14oz, Black (9908K) are used to repair cracks in skimmers, main drains, and fittings or in cracks on plaster, gunite, fiberglass, or acrylic surfaces. You may be interested in viewing the Marlig Fix A Leak 1 Quart - 32OZFAL click here to view further instructions. InyoPools offers online sales transactions, you should receive your order within 5-7 business days.

?     Asked on 2/6/2017 by Tim

Would this material be a good solution to cover a hole in a sump pump pit? The pit itself is plastic and the water in it about 55 degrees, what are the effects of cold water on your protect?

A     Answered on 2/7/2017 by InyoPools Product Specialist Lennox H.

Hi, Tim.The AquaMend Underwater Putty can be used on plastic and will hold up in temperatures -40° - 250°F.

?     Asked on 1/25/2017 by Paul Solomon

Can this be applied on the shallow end using a short pool pole, by attaching to end of pole?

A     Answered on 1/26/2017 by InyoPools Product Specialist Alan M.

This product is not designed to be inserted or attached to the end of a pole for application, although if you are creative, I am sure you could find a way to make it work.

?     Asked on 1/3/2017 by

I want to anchor a concrete reinforcing wire mesh about 1.5 ft wide by 8 feet long to the top of a concrete dam. Will this material fasten the wire to the concrete surface once it is cleaned. Thanks. RFO

A     Answered on 1/4/2017 by InyoPools Product Specialist Adam Y.

Good morning, This product will bond to a list many surfaces including fiberglass, concrete, glass, ceramics, metals, wood, and many plastics. Knowing the dimensions of your job. You will need more than a 2 oz stick to complete. The epoxy will need time to setup you will need to find a way to hold the fencing allowing setup time for epoxy.

?     Asked on 12/13/2016 by Jerry

can this be used where there is hot water under pressure? We have a leak in the side of our aluminum hot water heater tank on our RV.

A     Answered on 12/14/2016 by InyoPools Product Specialist Adam Y.

Good morning Jerry, This product is made for pool leaks, With it being under pressure there is not a lot you can do. I would see if there is any forums online that cover water heater leaks or check with the manufacturer of the heater and see what you can do.

?     Asked on 9/26/2016 by

I have a crack in my In ground pool steps, can this be used for this type of repair? (Crack is on the portion of the step where you stand so will need to be flexible.) Thank you.

A     Answered on 9/26/2016 by InyoPools Product Specialist Stacey M.

Hello, The AquaMend is an Underwater Repair Epoxy Putty. This will harden (its not flexible) in water and is a hand-kneadable, fast-setting, fiberglass-reinforced polymer compound for permanent repairs to many surfaces including fiberglass, concrete, glass, ceramics, metals, wood, and many plastics.

?     Asked on 8/30/2016 by jON

Will this work on plastic bathtub. on the bottom portion where you stand?

A     Answered on 8/30/2016 by InyoPools Product Specialist Stacey M.

Hello Jon, AquaMend Epoxy Putty Stick is a hand-kneadable, fast-setting, fiberglass-reinforced polymer compound for permanent repairs to many surfaces including fiberglass, concrete, glass, ceramics, metals, wood, and many plastics

?     Asked on 7/27/2016 by Pino Valle

I notice a crack on my in ground step, i believe they are fiberglass with an acrylic finish ( white) Can i use Aquamend underwater repair expoxy to apply over the crack to provide a water tight seal. Thanks

A     Answered on 7/28/2016 by InyoPools Product Specialist Alan M.

The AquaMend is an Underwater Repair Epoxy Putty. This will harden in water and is a hand-kneadable, fast-setting, fiberglass-reinforced polymer compound for permanent repairs to many surfaces including fiberglass, concrete, glass, ceramics, metals, wood, and many plastics.

?     Asked on 7/1/2016 by jim

can this be put on under water?

A     Answered on 7/1/2016 by InyoPools Product Specialist Alan M.

The AquaMend is an Underwater Repair Epoxy Putty. This will harden in water and is a hand-kneadable, fast-setting, fiberglass-reinforced polymer compound for permanent repairs to many surfaces including fiberglass, concrete, glass, ceramics, metals, wood, and many plastics.

?     Asked on 6/25/2016 by Darron

Will this work on above ground pool liners? Kids jame dit with the metal pole and there are a few slits in the pool floor now with a slow leak.

A     Answered on 6/26/2016 by InyoPools Product Specialist Alex V.

Darron, This is not recommended for vinyl liners. You may want to try a vinyl liner repair kit.

?     Asked on 6/6/2016 by

I have an above ground pool my skimmer has a slow leak between the skimmer box and where it meets the outside wall of the pool. I am guessing the gasket is slowly leaking .will this appoxy adhere to this wet situation or do I need to drain the pool down past the Skimmer box Thank you

A     Answered on 6/7/2016 by InyoPools Product Specialist Alan M.

The AquaMend is an Underwater Repair Epoxy Putty. This will harden in water and is a hand-kneadable, fast-setting, fiberglass-reinforced polymer compound for permanent repairs to many surfaces including fiberglass, concrete, glass, ceramics, metals, wood, and many plastics.

?     Asked on 5/25/2016 by Lisa Howard

Do you have the pool epoxy in colors, My pool is light tahoe blue

A     Answered on 5/25/2016 by InyoPools Product Specialist Lennox H.

Hi Lisa, AquaMend does offer other colors but we only sell the white.

?     Asked on 2/15/2016 by Rene

Hi, I need to change/replace my in ground pool light fixture, I noticed a gummy material sealing the old cord to the old future casing. Is this the old Epoxy putty? If so, I need to drain the pool enough to remove the old putty, replace the light fixture and seal it with the epoxy putty?

A     Answered on 2/16/2016 by InyoPools Product Specialist Christian R.

Rene,How are you? Thank you for emailing Inyo Pools. You do not need to drain the pool for the epoxy will dry/cure under water.Best RegardsChristian

?     Asked on 6/2/2015 by Joe

I have a small crack in my inground pool and im looking for a compound that I can put in the crack under the water

A     Answered on 6/2/2015 by InyoPools Product Specialist Joe S.

Hi Joe, Yes this AquaMend Epoxy will cure under water and will dry white.

Top

Review Summary

  (Average 0 out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)