By Wilbar
Part # NBP3078
Manufacturer Code 10296
Alternate Part #'s 10296
For More Above Ground Pool Parts
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
Click here to submit the information requested below.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
I purchased a used pool and need to replace some of the parts. Will these parts fit any pool?
Reply
Before placing an order you will need to know the manufacturer and model of your pool. Pool parts are not universal and are not guaranteed to fit any model other than the one listed.
Reply
I have a 15 year old K-mart pool. 42" x 15' round. It's meant to come down in the cold weather. It's basically a piece of fiberglass screwed together to form a ring. I use a new liner each year. The coping, that used to be in one piece, has been rotting away and needs to be replaced. Is there anything available longer than the 48" coping, or do I need to buy several pieces and splice them all together?
Mike
Reply
Hi, Michael. These coping are only available in 48" and we have some that are 47" long. You're not going to find any that are longer. You will have to make sure these will fit your pool.
Reply
I am NOT trying to use this for a pool.
I AM hoping it is the same product I have purchased before.
1) Is the picture shown a picture of the actual product?
2) Is it black?
3) is it about 1" wide
Thanks in advance for your reply
Reply
Hi, Mark. The picture shown does depict the actual product. The color varies but is available in black. It is 1" wide.
Reply
