AquaFlo Gecko Alliance CMHP Pump 1/15 HP 115V, 1SPD - 34-402-1140



Part # 34-402-1140

By Gecko Alliance

  5 Average  



Part # 34-402-1140

Dimensions 12.5" L x 6" W x 8" D

Alternate Part #'s 02093000-3010, 02093005-2510, 02093009-2500, 02093370-2010, 02093370-3010, 02093460-2, 02093460-2010, 02093460-2100, 02093460-2110, 02093460-2180, 02093460-2500, 02093460-2510, 02093460-2580, 02093460-3510, 02093627-2010, 02093627-2110, 02093627-2510, 02093627-3010, 02093628-2010, 02093628-3010, 02093635-2, 02093635-2000, 02093635-2010, 02093636-2, 02093637-2, 02093644, 02093677-2, 02407720-2, 02410005-2, 02410362-2, 02410433-2, 321810, 5KCP35DNB819X, K55MYGJN-8255, X321790

Product Description

Aqua-Flo Circ-Master Pump.

Aqua-Flo by Gecko's Circ-Master pump takes 24-hour filtration to a new level, delivering the highest GPM of any recirculation pump on the spa industry. Higher GPM allows the Circ-Master to operate a high-flow heating system resulting in increased heating efficiency and up to four times the filtration. Built for long lasting use, the Gecko Aqua-Flo Circ-Master Pump is a single-speed recirculation pump that provides continuous performance as well as energy efficient operation to portable spas. Its 48-frame design also features front and rear ball bearings for unbeatable performance and a longer lifespan. Engineered for center discharge installation, it includes a 1-1/2" inlet and outlet that connects to existing PVC piping, and its carbon-graphite seal is self-lubricating for continuous operation

Spa Pump Features:

  • 48 frame, continuous-duty construction with front and rear, permanently lubricated ball bearings for extended motor life.
  • Carbon-graphite self-lubricating seal designed for continuous duty operation.
  • 1-1/2" suction and discharge.
  • Quick release compression fittings allow for easy installation or maintenance.
  • Available in side discharge and center discharge models.
  • Available with 115v and 230v motors
  • California Title 20 Compliant
Accessory Pump Type Circulation
Manufacturer AquaFlo/Gecko
Pump Model CMHP
Speed 1 Speed (1-Spd)
Motor Voltage 115v
Drain Plug Location 3,6,9 o`clock
Suction Style Center
Suction Connection Type Female Pipe Thread (fpt), Male Buttress Thread (mbt)
Suction Pipe Size 1-1/2"
Discharge Style Side
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Pipe Size 1-1/2"
Horsepower 1/15hp
Motor Frame 48 Frame Thru-Bolt
Motor Amperage/Wattage 1.3A

**Warning - OEM pump manufacturers may change motor styles without notice. Pumps may be with or without a run capacitor.**

Click here for more Spa Pumps.

Product Specifications

Pump Model:
Circ-Master CMHP
1/15 HP
1725 RPM
115 V
48 Thru-Bolt
Plumbing Port Type:
Female Pipe Thread (fpt)/Male Buttress Thread (mbt)
Union Connectors:
Impeller # :
Volute/Sealplate #91231301
Discharge Location:
Intake Port:
1.5 in.
Discharge Port:
1.5 in.

?     Asked on 10/8/2020 by KEN

Hello will this replace marathon electric model 5KCP35DNB819X THANK YOU KEN


A  Answered on 10/9/2020 by InyoPools Product Specialist Hector F.

Ys this is the correct replacement pump for your model 5KCP35DNB819X. 

?     Asked on 6/3/2020 by Amy

Does this replace pump model 02410512-2 from a Sundance Spa?

A  Answered on 6/4/2020 by InyoPools Product Specialist Hector F.

Actually, the direct replacement for your model 02410512-2 pump is part number 34-402-1142 that you can view by clicking here

?     Asked on 5/29/2020 by Bernd

Is this pump a self-prime type and what is the lift (suction)?

A  Answered on 12/23/2020 by InyoPools Product Specialist Hector F.

Hi Bernd, these spa pumps are gravity fed and so are not designed to self-prime or to pull water up from below it. 

?     Asked on 4/3/2020 by

Will this pump be a good replacement for a Marquis 3 person spa?

A  Answered on 4/9/2020 by InyoPools Product Specialist Patrick P.

Hi, Could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper pump recommendation.

?     Asked on 3/30/2020 by Fred

I bought this pump a few years ago to replace the pump on my spa. It worked great and still runs. The seal on the motor shaft to the pump is leaking. Can I get a new seal? Thanks Fred

A  Answered on 3/30/2020 by InyoPools Product Specialist Lennox H.

Hi, Fred. The replacement Shaft Seal  - PSR-200 and Housing O-ring - 251 are available. 

?     Asked on 1/19/2020 by KEN

My old circ pump 5KCPDNB819X says frame is 56y out side thread 2 3/8" PLEASE recomend new unit THANK YOU KEN

A  Answered on 1/24/2020 by Industry Professional

5KCPDNB819X is motor only info that does not search, there should be more model info on the pump possibly on another label.

?     Asked on 10/14/2019 by Madi

So can y’all rotate it before sending or do we still do the rotating either way?

A  Answered on 10/15/2019 by InyoPools Product Specialist Hector F.

Unfortunately, we would not be able to rotate that for you. You would just need to remove the thru-bolts that feed into the pump from the back of it then rotate the wet end. 

?     Asked on 10/12/2019 by Madi

How difficult is it to rotate the discharge so that it comes out horizontally rather than vertically?

A  Answered on 10/14/2019 by InyoPools Product Specialist Steve M.

Madi, it is fairly easy to rotate the discharge on the AquaFlo Gecko Alliance CMHP Pump 1/15 HP 115V, 1SPD - 1.5" SIDE DISCHARGE - 02093000-2010. We do however suggest contacting the manufacturer for the best advice on completing the rotation. Aquaflo can be reached by calling 800.221.1750.

?     Asked on 3/10/2019 by Dusty

Are there connectors to connect to regular hose pipes? Is it easy to change to connect power to extension cord? Plan to use to connect to solar heater panels for pool.

A  Answered on 3/10/2019 by InyoPools Product Specialist Lennox H.

Hi, Dusty. This pump has unions for 1-1/2" pvc pipes. Yes, it is easy to install a power cord. 

?     Asked on 4/18/2018 by Dontavis Brown

Can anyone tell me what size compacitor I need for this motor. Just bought the house and the compacitors wasn't on the pump.

A  Answered on 4/20/2018 by InyoPools Product Specialist Lennox H.

Hi, Dontavis. The replacement capacitor for this pump is not available as a separate part, you will have to replace the pump. 

?     Asked on 8/21/2017 by

Is this a direct replacement for a Aqua flo 02093635-2 Thanks

A  Answered on 8/21/2017 by InyoPools Product Specialist Lennox H.

Hi. This is a direct replacement for the  AquaFlo 02093635-2 pump.

?     Asked on 5/17/2017 by Larry Edmonds

Will the 002093000-2010 replace the leisure spa 5kcp35dnb819x

A  Answered on 5/20/2017 by InyoPools Product Specialist Lennox H.

Hi, Larry. Yes, this CircMaster pump is a suitable replacement for the Leisure Spa pump.

?     Asked on 5/28/2015 by

Will this replace the 002093641-2

A  Answered on 5/28/2015 by InyoPools Product Specialist Lennox H.

CircMaster CMHP 1/15Hp 115v (02093000-2010) will replace the 002093641-2 model.

?     Asked on 5/4/2015 by Jeff Graves

Is this the newer replacement for the 02093637-2 pump? Thank you! Jeff

A  Answered on 5/4/2015 by InyoPools Product Specialist Lennox H.

Jeff, The CircMaster CMHP 1/15Hp 115v (02093000-2010) is the current model number for model # 02093637-2.

?     Asked on 4/7/2015 by

Does this pump come with the unions shown in the picture?

A  Answered on 4/8/2015 by InyoPools Product Specialist Robert M.

The unions are included with the pump.


Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Recent Reviews