Motor ,Two Compartment C-Face Keyed 1.0HP Sgl Spd 115/230V (SK1102)

$218.99

IN STOCK
FREE SHIPPING

Part # SK1102

By Century Motors


Details

Top

Part # SK1102

Dimensions 14.5" L x 5.5" W x 5.5" D

Alternate Part #'s 10197, 1095, 110242, 12718, 164439, 16542, 1K042, 312P211, 5KCR39SN2820X, 6K249, 6K891, 89189, 91724, A600DH, A600DH2, A600DL2, A600EH, A600EHL, A600EL2, A600ELL, A600FL, B122, B134, B705, C1095, C48K2D128, C48K2DA134, C48K2DA143, C48K2DA147, C48K2N117A5, C48K2N121A1, C48L2D5C1, C48L2DA126, C48L2DA134, C48L2DA146, C48L2DA5C1, C48L2DB134, C48L2DB134A2, C48L2N101, C48L2N103, C48L2N109, C48L2N115, C48L2N117, C48L2N121, C48L2N122, C48L2N122A2, C48L2N131, C48L2N131A4, C48L2N131B1, C48M2D104, C48M2DA104, C491, CD10FL1, EB122, M-514R, M514, S88-172, SK1102, SW2559, V12718

Product Description

Your Source for Swimming Pool & Spa Parts With 40,000 Parts in Stock - INYOpools.com

Motor Dimensions Motor Dimensions
Motor Image Motor Image

Product Specifications

Motor Name:
1 HP SK1102 Replacement Pool Motor
HP:
1 HP
Speed:
Single
RPM:
3450 RPM
Volts:
115/230 V
Amps:
17.0/8.6 amp
Service Factor:
1.5
Total HP:
1.5 HP
Frame:
56C
Stock #:
SK1102
Shaft:
Keyed
Overload Protector:
Auto
Dimension Letter:
AG
Dimensions:
12 - 1/8 in.
Commonly Used On:
Pentair/Purex, Sta-Rite, Premier, Sta-Rite, Jacuzzi, Aqua-Flo, Wet Institute
Top

?     Asked on 6/2/2019 by Joe Thompson

My dead pump is an A.O. Smith SK 1102. The electrical specs look the same but there is no mention of the spacing on center between the mounting holes. Mine are 4.25" on center. The only illustration of this spacing on other similar pumps is 5" on center. Is this pump 4.25 " spacing and if not, which one is? Thank you.
 Reply

A  Answered on 10/3/2019 by InyoPools Product Specialist Michelle B.

Hello, I can look into this for you. Can you please provide a picture of the motor label?
 Reply


?     Asked on 1/19/2012 by Guest

I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
 Reply

A  Answered on 1/19/2012 by InyoPools Product Specialist Patrick P.

Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
 Reply


?     Asked on 1/12/2012 by Guest

Why should I purchase a Tune Up Kit?
 Reply

A  Answered on 1/12/2012 by InyoPools Product Specialist Patrick P.

A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
 Reply


?     Asked on 1/12/2012 by Guest

Why do I need to purchase a new shaft seal?
 Reply

A  Answered on 1/12/2012 by InyoPools Product Specialist Patrick P.

We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
 Reply


?     Asked on 1/11/2012 by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)