A.O. Smith 1 HP Square Flange 56Y Dual Speed Full Rate Motor - B2982

$280.99

IN STOCK
FREE SHIPPING

Part # B982

By Century Motors

  4.67 Average  

Details

Top

Part # B982

Warranty 1 Year

Manufacturer Code B2982

Alternate Part #'s 12072, 165983, 177067, 177144, 177176, 177631, 190166, 193508, 193859, 193859PJ, 193989, 1D184, 35-5376, 5KC39UN2560CT, 5KC39UN2560T, 5U138, 8-177067-03, 8-177067-05, 8-177144-04, 8-177631-01, A100EHL-YS, B2982, B48L2P104A1, B961, C1311, EB982, SQH10FL2, SQS1102R

Product Description

MAGNETEK SQUARE FLANGE 56Y FRAME 2 SPEED CATALOG # B982 PART # 8-177067-05 ..... HORSEPOWER LABEL HORSEPOWER: 1.0-.16 SERVICE FACTOR: 1.65 EFFECTIVE HORSEPOWER: HIGH SPEED: 1.65 LOW SPEED: .264 ..... DIMENSIONS LENGTH: 12 1/2" EXCLUDING SHAFT SHAFT LENGTH: 2 1/4" FLANGE: 6 1/2" x 6 1/2" ..... CAPACITOR RUN CAPACITOR: 25 MF, 370 VOLTS *CURRENT MODEL* MOUNTING ON TOP OF THE MOTOR (OPT# 5270-08) ..... ELECTRICAL VOLTAGE: 230 VOLTS SINGLE PHASE AMP DRAW: 7.2/3.0 AT 230 VOLTS ..... SHIPPING WEIGHT: 32.45 LBS

**NOTE: THIS MOTOR IS SHIPPED LESS HI-LO SWITCH. YOU MAY PURCHASE THE HI-LO SWITCH SEPARATELY BY ORDERING PART # 2512558-001.

Motor Dimensions Motor Dimensions
Motor Image Motor Image

Product Specifications

Motor Name:
1 HP B982 & B2982 Replacement Pool Motor
HP:
1/ .13 HP
Speed:
Dual
RPM:
3450/1725 RPM
Volts:
230 V
Amps:
7.4/3.0 amp
Service Factor:
1.65
Total HP:
1.65 HP
Frame:
56Y
Stock #:
B982 or B2982
Shaft:
Threaded
Overload Protector:
Auto
Dimension Letter:
C
Dimensions:
13.4 in.
Commonly Used On:
Pentair WhisperFlo
Flange:
Square
Timer:
No Timer
Notes:
California Title 20 Compliant
Top

?     Asked on 8/13/2019 by Jason Russell

Hello, will this work as a replacement for Century part# 0-f56aa37a01-04 ? I'll also order the dual speed switch & rebuild kit.
 Reply

A  Answered on 8/13/2019 by InyoPools Product Specialist Lennox H.

Hi, Jason. Yes, this B2982 motor can be used as a replacement for 0-F56AA37A01-04. 
 Reply


?     Asked on 5/5/2019 by Motor Question

I’m trying to find a replacement pool motor as mine started whining yesterday and now it won’t move water properly. From what I can see of the pump it runs at 1.25 real horsepower and the motor at 1.9 or 1.65 depending on high speed or low. I’m interested in a single speed motor that matches my pump which is the whisperflo pictured, how should I change my setup or is this motor my only option, thank you for any help you can give me.

 Reply

A  Answered on 5/5/2019 by InyoPools Product Specialist Lennox H.

Hi. If the impeller that you currently using is original to the pump, you can use the PL2853 or the B2853 single speed motor. If not and it was changed to match the B982 motor, you will have to use the B2854 or PL2854. You will also need the Whisperflo Tune Up Kit - GOKIT32 or GOKIT32SALT
 Reply

  • Commented on 5/5/2019 by Product Owner

    Thank you for the fast response, how can I tell what impeller is in there?
     Reply

    • Commented on 5/6/2019 by InyoPools Product Specialist Patrick P.

      If you know that you have never replaced the impeller then the original impeller used on the Whisperflo WFDS-24 would be this 1 HP Up Rate Whisperflo Impeller. If you are unsure then there should be a part # embossed into the impeller and you will need to follow these instructions on How to Replace a Pool Pump Impeller. Once you get that part # off the front of the impeller then reply back to us with the part # and we can confirm the proper items you will need. 
       Reply


?     Asked on 1/1/2019 by Manu

I am interested in replacing a Century B2854 pump with this dual speed unit. Would this be a drop-in replacement?

 Reply

A  Answered on 1/2/2019 by InyoPools Product Specialist Kevin G.

Hello Manu, thank you for contacting Inyo Pools. Yes, the B982 can replace your B2854.
 Reply


?     Asked on 6/24/2018 by Mario in California

I have a Purex Triton–vintage WhisperFlo pump with a Magnetek/Centurion 1.0 hp, 1.65 service factor motor that has developed a dead spot. Is it feasible to use this B982 motor on my pump to convert it to a dual-speed, or would that be incompatible with the impeller?
 Reply

A  Answered on 6/25/2018 by InyoPools Product Specialist Lennox H.

Hi, Mario. You can replace your single speed motor to a dual speed using this B2982 - 1 HP Dual Spd. Motor - Full Rate which will require the Dual Speed Pump Timer - T106R. The impeller will be compatible with this B2982 motor. You will also need the Whisperflo Tune Up Kit - GOKIT32 or GOKIT32SALT
 Reply


?     Asked on 4/10/2018 by Masa Sato

I have a Sta-Rite MAX-E-PRO Centrifugal Pump Model # P6RA6E-205L. WHAT MOTOR IS RECOMMENDED FOR REPLACEMENT?
 Reply

A  Answered on 4/11/2018 by InyoPools Product Specialist Lennox H.

Hi, Masa. The correct motor for that model pump is the Century B2853 or the Pureline  PL2853. You will also need to replace the pump shaft seal and o-rings, they are listed on the Sta-Rite Max-E-Pro Pump Parts Diagram page. 
 Reply


?     Asked on 1/15/2017 by JAMES J LOETE

Have gone through 3 capacitors in 3 years. Using a 30mFd 370V run capacitor. What is the correct capacitor?
 Reply

A  Answered on 1/16/2017 by InyoPools Product Specialist Adam Y.

Good morning James, You are looking for Capacitor, Run 370v 30 Mfd (5vr0303). They can fail do to temperature drops and unstable voltage.
 Reply


?     Asked on 9/26/2014 by Guest

What is the approximate energy/cost savings between a one and two speed motor?
 Reply

A  Answered on 9/26/2014 by InyoPools Product Specialist Patrick P.

Having a 2-speed pump should cut your energy consumption in half.
 Reply


?     Asked on 2/16/2012 by Guest

I just finished replacing the shaft seal on my booster pump. As soon as I turned the pump on water was leaking from the shaft seal. Is it defective or am I doing something wrong?
 Reply

A  Answered on 2/16/2012 by InyoPools Product Specialist Patrick P.

Depending on the model, the installation of a booster pump shaft seal can be slightly different than a pool pump shaft seal. Some booster pump and pool pump shaft seals require that a silicone sealant be used on the outer areas of the metal seat of the shaft seal. The seal will need to be lightly hammered into the body of the pump. You can use a 1 inch PVC coupling or a piece of 1 1/4 inch PVC pipe and a rubber mallet. This procedure will apply to any pool pump or booster pump using a >PS-1000 style shaft seal.
 Reply


?     Asked on 1/19/2012 by Guest

I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
 Reply

A  Answered on 1/19/2012 by InyoPools Product Specialist Patrick P.

Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
 Reply


?     Asked on 1/18/2012 by Guest

How can I tell whether or not my motor is a dual or single speed?
 Reply

A  Answered on 1/18/2012 by InyoPools Product Specialist Patrick P.

Most dual speed motors will have a toggle switch that will allow you to adjust the motor speed to either high or low. Another way to tell if your motor is dual speed is by looking at the RPM's on the motor specifications label. If there are two RPM's listed such as: 1725/3450 then motor is dual speed. If there is only one RPM, then motor is single speed.
 Reply


?     Asked on 1/18/2012 by Guest

Can you direct me to the proper hi low switch for this motor?
 Reply

A  Answered on 1/18/2012 by InyoPools Product Specialist Patrick P.

Unfortunately the manufacturer does not offer the switch for the 2 speed 220v motors any longer. If you already have a 220 volt timer (on/off) you would need an Intermatic T106R to switch from high to low speed. If you do not have a timer currently you would need the T10604R which is a 220v on/off timer and a high/low timer.
 Reply


?     Asked on 1/12/2012 by Guest

Why should I purchase a Tune Up Kit?
 Reply

A  Answered on 1/12/2012 by InyoPools Product Specialist Patrick P.

A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
 Reply


?     Asked on 1/12/2012 by Guest

Why do I need to purchase a new shaft seal?
 Reply

A  Answered on 1/12/2012 by InyoPools Product Specialist Patrick P.

We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
 Reply


?     Asked on 1/11/2012 by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply


Top

Review Summary

 (Average 4.67  out of 5 stars)
3 Rating
5 star:
 
(2)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews