Tune Up Kit Jacuzzi LPH, LPC, LTPH, LH, & LTH Series - GOKIT60



Part # GOKIT60

By Aladdin



Part # GOKIT60

Product Description

INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.

This Tune Up Kit Works on These Pumps:

  • Jacuzzi LPH, LPC, LTPH, LH, & LTH Series

Tune Up Kit Includes:

  • Shaft Seal
  • Lid O-Ring
  • 2 - O-Rings
  • Pump Square O-Ring
  • Lubricant

For More Pool Pump Motors


?     Asked on 11/13/2020 by Paul Whitt

Will this tuneup kit fit my Jacuzzi JP150 pump?

A  Answered on 11/13/2020 by InyoPools Product Specialist Joe S.

Hello Paul, at this time we do not have the seal kit for that unit. 

?     Asked on 10/15/2014 by Guest

My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?

A  Answered on 10/15/2014 by InyoPools Product Specialist Patrick P.

The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.

?     Asked on 2/13/2012 by Guest

I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!

A  Answered on 2/13/2012 by InyoPools Product Specialist Patrick P.

You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.


Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Socket Set

removed old parts and put new parts in

Written on 2/1/2017 by Guest

I followed parts, took old parts off then put new parts back on and then put everything back together. Everything seems prefect. I don't have any problems with any repairing because I am handy man. :) I can't hook up right now because here it is winter so I have to wait until this May. at that time I will hook up to the pool and start up. I can wait until this May and find it out if there are any problems or not ! I know everything will be fine with parts during this summer.

Were these instructions helpful? 


Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
4 star:
3 star:
2 star:
1 star: