Part # GOKIT34
Alternate Part #'s 90-249-3034, AEQGOKIT34, ALDGO-KIT34, APCK1029
INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For More Pool Pump Motors
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
Looking for seals for Aqua Flow, Model # 02115519 - 2. Code 04029. Serial # * 069054 - 040. Can you help me with this? if so please send price and ordering instructions Thank you. Roy.
Reply
Hi, Roy. This is the correct tune up kit for the AquaFlo FMHP Model # 02115519 - 2. The cost is listed on the site, you can add the item to your cart and checkout online to place your order.
Reply
Hello, Is this the correct seal kit for Aqua-flo Flo-Master HP (FMHP-151011)?
Hi, Dan. Based on the pump model, it is. However, I will need a picture of the wet end in order to confirm.
Reply
Thank you for the quick response. Attached are some photos of the wet end of the pump. Also, can you take a close look at the pic of the shaft. Is that part of the impeller shaft that may be cracked?
Dan, This tune up kit will work. Yes, it does appear that the impeller shaft is cracked. The replacement impeller is P/N 91693651.
Reply
Hi Lennox H, Thank you for verifying that and providing the part number for the impeller. Do you happen to sell the entire pump assembly including the motor? If so can you provide me with your part number and cost? That might be the better route to go. Also, how long does it normally take for a Luna 4 person spa to heat up? This one doesn’t seem to heat very well.
Reply
Dan, The complete pump is P/N 02115000-1010. Use the link provided to view the pump cost.
Reply
The Most Recent Reviews
(4 out of 5 stars) Did the job !
Reviewed By: Asha from Minnesota ()
Pros: Quick delivery
Cons: too many extra parts in kit
Placed order and in two days I received it. Assembly went fine and no leaks.
Was this review helpful to you?
(5 out of 5 stars) Stopped the Leaks!
Reviewed By: Sklcrkr ()
Pros: All seals included
Kit contained all necessary parts and fit perfectly. Shipped fast THANKS Inyopools
Was this review helpful to you?