EP Hi-Build Epoxy - 2 Gal. - White - NA617



Model # NA617

By Blue Wave

  5 Average  



Model # NA617

Product Description



underwater speakerWhy purchase Swimming Pool Paint from Inyo?

Lowest Prices Guaranteed!
No need to wonder if you are getting the best price on Epoxy Swimming Pool Paint! Find a competitor with a lower shipped price on the same product and we'll beat the price! Simply contact us with the competitor's website and product information and we'll BEAT their price! If we are unable to beat the competition's price, we will send you a reward code for $10 off your next purchase of $50 or more.

INYOpools.com has Great Swimming Pool Paint Resources!

Pool Paint Surface Calculator - Find out how much paint you will need for your swimming pool.
Click for Paint Compatibility Chart - Find out which type of pool paint is best for your swimming pool.

EP Hi-Build Epoxy Swimming Pool Paint Details:

Our 2-part Hi-Build epoxy coating provides a hard non-porous tile finish that is durable to automatic cleaners and pool chemicals. Hi-Build is crammed full of epoxy resin, U.V. stabilizers, and silicone that further protect against damage caused by algae, U.V. rays and chlorine. Plus, it's easier to keep clean than a plastered pool!

Hi-Build has excellent fill qualities, resulting in a perfect application – even on imperfect pool surfaces. This self-priming coating also has a 1:1 mix ratio, which makes it a much stronger, heavier duty epoxy than other leading brands with much lower mix ratios. 

Apply over most types of epoxy pool coatings in good condition. Can also be applied over bare concrete, plaster, gunite, and fiberglass. Lasts up to 8 years. Dries quickly. Available in White and Dawn Blue.* 2 Gallons.

This superior high build epoxy is formulated to provide the longest lasting finish of any pool paint.


  • Renovates aged concrete, plaster, and fiberglass surfaces
  • Up to eight or more years of service life
  • Satin finish
  • Abrasion and chemical-resistant
  • Superior choice for spas
  • Self-priming
  • Two-coat system on bare surfaces
  • Alternative to replastering at one-third the cost
  • VOC compliant everywhere in US and Canada

EP Hi-Build Epoxy Specifications:

  • Priming: Self-priming
  • Application: Roller / Brush / Spray
  • Mixing: Mechanically mix
  • Coverage: Up to 250 Sq. Ft. per kit
  • Fill Time - Outdoor: 5 dry days
  • Fill Time - Indoor: 10 days
  • Clean-Up: Ramuc Thinner
  • Limitations: Three-hour "pot life" when component A and B are mixed together
    Do not apply to a weak or unsound surface

For more Swimming Pool Paint

Color Color

?     Asked on 8/21/2018 by David

What's the best paint to re-paint pool coping?

A  Answered on 8/24/2018 by InyoPools Product Specialist Lennox H.

Hi, David. Paint for decks will be referred for concrete copings. 

?     Asked on 2/18/2008 by Guest

What are instructions for applying this product?

A  Answered on 2/18/2008 by InyoPools Product Specialist Patrick P.

Here is a link to the manufacturer's application guide:  http://www.ramucpoolpaint.com/pdf/Hi_Build_app.pdf

?     Asked on 6/11/2007 by Guest

I purchased a home with a pool that will need paint, but have no idea as to what type of paint was previously applied. Will the previous paint need to be removed (down to bare concrete)or will the epoxy adhere to all other paints?

A  Answered on 6/11/2007 by InyoPools Product Specialist Patrick P.

The Epoxy paint can only be used on top of Epoxy paint or concrete, so if you were not sure of the old paint we would recommend removing the old paint all the way down to bare concrete to assure the best results. 

?     Asked on 5/27/2006 by Guest

This product comes in 2 1-gallon containers yet the description says it covers 125 sq ft per gallon. Does mixing the two cans together produce 1 or 2 gallons?

A  Answered on 5/27/2006 by InyoPools Product Specialist Patrick P.

This product is mixed together to make 2 gallons of paint and will cover a total of 250 sq. ft.


Est. Repair Time

4 to 8 hrs

Tools Needed

Screwdriver, hand-drill to mix; paint rollers and small brush

2     0

Fiberglass Pool was Deteriorating

Written on 5/8/2018 by Guest

EP Hi-Build was the perfect coating for aging, worn fiberglass. Surface prep was minimal as it was already 'rough' to allow excellent coverage of the Hi-build Epoxy. Need a few days of No rain in forecast; 3/8's nap roller and a solid 5-gallon bucket to mix the two 1-gallon parts (Part A and Part B). After a 20-minute 'mix' and a 20-minute 'activation', start your application. Don't really need 'painting' skills to get a great finish. Allow at least 5-day's cure-time for the epoxy to dry, before adding water back into the pool.

Were these instructions helpful? 


Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
4 star:
3 star:
2 star:
1 star: