Part # NW1356
Pool winter cover clips are tightly gripping fasteners designed to secure above ground pool covers in place.
Note: will not work on soft-sided pools such as Intex.
Please see our clip sizing chart for the most popular above ground pool sizes:
click here for more Pool Winterizing
Will the clips work on my aqualeader by trending above ground 15 x 30 oval? Thanks
Hi, Tim. Yes, these clips will work with your pool.
We have a 1996 model 27 foot round Lomart above ground pool with the original rails. Will these clips work?
Hi, Royce Young. These clips can be used with Lomart above ground pools.
Will these work on my above ground Splash Super Pool (17' X 29.5')? If so, how many will I need? Can I use them by themselves to hold the cover in place all winter long, or are these only meant to supplement a winch & wire cable system? Thanks, Cuz
Hi, Cuz. These clips will not fit a Splash Super Pool.
Do these come in white? I bought these a couple years ago from you and they were white. Can I still get them in white?
Hi. These clips are only available in black.
Will these clips work an Esther Williams 24' pool?
Hi Tony. Yes, these clips can be used on an Ester Williams pool.
Have a 30' oasis above ground pool. will the clips work
Yes, those will work great with your Oasis. You would need quantity 66 for a 30' round pool.
Will these clips work on my ProSeries 14' above ground pool?
Hey Marie, I apologize, but they will not work with you Proseries 14' you might want to check with Walmart for replacement parts.
How is best way to fold safety pool cover 20x40 for summer storage
Here is the best way to store the cover for the summer by following these steps: 1. Clean the Cover of any debris before removing it. 2. Remove the Cover Springs and Screw Down Anchors. 3. How you remove the cover from your pool is important for minimizing damage risks. Start at one end of the cover and fold the cover in small sections in an accordion-style until your reach the end. Carefully remove it from the end of the swimming pool and set it on a flat clean surface. 4. Clean the Cover thoroughly by spreading it out on a clean section of your lawn and clean it thoroughly using a mild detergent mixed with water. You want to wait for the cover to be dry before you store it away. Once dry, fold the cover in half as many times as possible until it is small enough to fit in the storage bag that was supplied with it. When storing the cover, do not set it on the floor.
I have a 15' Summer Escapes above ground pool. Will these clips fit?
Hi Joanne, The Swimming Pool Cover Clips (30-Pack) can be used on your Summer Escapes Pool.
I have a 24' Morada above ground pool. Will these clips work?
Hi, The Swimming Pool Cover Clips will work with your 24' Morada Pool.
Will the clips work on an Outback Brisbane 27' round pool?
Hi Nancy, Swimming Pool Cover Clips (30-Pack) will work with your Outback Brisbane 27' round pool top rail.
Will these clips work on an Intex pool?
The cover clips will not work on an Intex Pool.
(1 out of 5 stars) swimming Pool Cover clips
Reviewed By: James U. from Bellevue, OH ()
Pros: good idea
Cons: don't work with strong winds
These clips may be good for in town use, but I live in the country and have strong winds which causes the clips to come off. I even tried three clips on each section. I ordered a pack of (30) and a pack of (10) so I had plenty.
(5 out of 5 stars) Wonderful product
Reviewed By: John T. from Erin, TN ()
Pros: Easy to use and they stay on.
These are wonderful. I have used jugs of water to hold the cover in the past with mixed results. These clips are much better and will not over stress the cover as jugs can.