Model # NY569
Model # NY569
Alternate Part #'s QPC55226EACH
Pool Care water balance chemicals
The first, most important step to proper pool care is to keep your pool water in balance. This will ensure that you are getting the most effective use of your chemicals. Test daily to ensure that pH, total alkalinity, calcium hardness and cyanuric acid (stabilizer) are within the correct levels.
STABILIZERCUTS CHLORINE CONSUMPTION BY UP TO 25%!
Stabilizer pre-conditions your pool water to make chlorine last longer. Use at the beginning of each season to protect chlorine from the sun's damaging effects and increase its effectiveness. Cyanuric Acid. Dosage: 1-2/3 lbs. per 10,000 gallons.
Click here for more Pool Balancers
Following chemical treatment, how long do I have to wait before I use my pool?
With the exception of superchlorinating (which requires waiting until the chlorine level drops to recommended levels), you can generally use your pool when the chemical is dispersed throughout the pool. Fifteen minutes to one hour is a good rule of thumb.
Less than 1 hr
Recently purchased a pool and my chlorine levels kept going too low. My pH was dead on so I searched inyopools and found out that stabilizer would make my chlorine levels last longer and is important to add when first filling a pool. Now my levels are all testing good and I'm saving $!
(4 out of 5 stars) Great stabilizer, for your pool
Reviewed By: rusty from Salt Lake City ()
Pros: helps clorine tablets last longer
Cons: a little to expensive
This stabilizer help me reduce my overall cost of clorine and ph for the season. Its a lit bit expensive but in the long run I saved on chemical cost. Just pour 1/2 bucket in and you good for the season.