Part # SP1091WM
Hayward Skimmer for Above Ground Pools
Hayward Dyna-Skim wide mouth automatic skimmer for above ground pools.
Note: The SP1091WM has replaced the SP1090WM Skimmer
SP1091WM Face Plate Specs:
do the skimmers come with the screws?
Hi, Penny. Yes, the screws are included with this skimmer.
Dose this skimmer come with 1.25" 1.50' hose to pump connector and a skimmer to pool wall, support brack
Unfortunately this skimmer does not include any hoses to connect to the pump. It does include the plate that connects it to the wall.
I have a wide mouth skimmer that I have to connect an HP DE pump. the pump takes a 1.5" hose and I need to know what adapter to get that will fit the skimmer.
Hi Jenny, The Combo Hose Adapter (SPX1091Z7) will work with this skimmer allowing you to connect your hose from the skimmer to the pump.
My above ground pool has soft vinyl sides, will I be able to use this skimmer on this type of pool?
Hi, This skimmer can not be used with a soft side pool.
is there a site or a diagram i could see to show me where exactly the gaskets go for my wide mouth skimmer
Hi John, The exploded parts diagram of the SP1091WM skimmer will show the skimmer placement of each of the gaskets.
Are all of the gaskets needed included as well?
Yes all of the gaskets are included.
Do any fittings or hoses come with this skimmer?
Yes, this skimmer comes with a Hydro Sweep Recirculation package which includes the following: SP1023 wall fitting, SP1419D eyeball fitting, (2) 1½" x 1 1/4" hose adapters, and SP11041 Skim Vac adapter plate to allow for vacuuming the pool.
What are the dimmensions of the inside opening of the face plate?
The dimensions for the inside opening of the face plate is as follows: 11 5/8" X 5" and the outside dimmensions of the opening are 13 15/16" X 7 7/8"