$87.59

Qty:

By Hayward Pool Products


Details

Top

Part # GLXPC12KIT

Alternate Part #'s GLX-PC-12-KIT, 59-150-1008, GLD-451-0102, GOLGLX-PC-12-KIT, HPPGLXPC12KIT

Product Description

Goldline / AquaLogic Temperature Sensor Kit w/ 15ft Leads - GLXPC12KIT

Top

?     Asked on 9/20/2015by Inyo Visitor

I have two sensors, one for the air temperature and one for water temperature. This part looks like my air sensor, but I need the water sensor replaced. Is this the correct one for water? Thanks!
 Reply

A  Answered on 10/2/2015 by InyoPools Product Specialist Lennox H.

Hi, The Goldline / AquaLogic Temperature Sensor Kit w/ 15ft Leads (GLXPC12KIT) would be the correct temperature sensor for the water.
 Reply


?     Asked on 9/19/2016by dan

where is this unit located in the system. I can't seem to located it.
 Reply

A  Answered on 9/22/2016 by InyoPools Product Specialist Lennox H.

Hi Dan. The temperature sensor input terminal is located on the left of the display on the Hayward Controllers.
 Reply


?     Asked on 8/8/2018by Ken

I have a Haywood System with a Pro Logic Controller and it shows a 'water temperature sensor short'. Do I assume that is what needs to be replaced, or do I do some troubleshooting? And, if bad, what is the part # and price?
 Reply

A  Answered on 8/8/2018 by InyoPools Product Specialist Lennox H.

Hi, Ken. You can troubleshoot the sensor by measuring the resistance. You can use the chart on page 44 of the ProLogic Troubleshooting Guide. If the sensor is fine, then the terminal is the issue. 
 Reply


?     Asked on 3/31/2019by Tom Pilch

I see another question in your Q and A section asking if his is the right sensor for the air, are the two sensors different, I have been led to believe that the two sensors are interchangeable and this sensor could be used either for the air or water sensing side of the unit ?
 Reply

A  Answered on 4/6/2019 by InyoPools Product Specialist Lennox H.

Hi, Tom. This Temperature Sensor Kit is used for water and air. 
 Reply


?     Asked on 12/12/2019by Kimberli

I have the E-Command 4 controller which is not keeping time so i am looking to replace it, However I noticed that the sensor for the water temp says there is a short is this the right item to replace it? Or should I look at something else?
 Reply

A  Answered on 12/17/2019 by Industry Professional

yes the GLXPC12KIT is the correct sensor (59-150-1008 )
 Reply


Top

Review Summary

 (Average 4.34  out of 5 stars)
6 Rating
5 star:
 
(5)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(1)

The Most Helpful Review


The Most Recent Reviews