Part # W3H250FDP
Warranty 1 Year
Universal H-Series Low NOx Heaters
For In-Ground Pools and Spas - Electronic Ignition Dual Thermostat
Now With Cupro Nickel Heat Exchanger!
NEW Hayward Universal H-Series Low NOx heater combines industry-leading hydraulic performance; environmentally responsible low NOx emissions and a standard cupro nickel heat exchanger with a low profile appearance, lighter weight design, independent left or right side electric, water and gas connections plus 2" x 2 1/2" CPVC union connections to provide the ultimate installation flexibility for new or existing equipment pads.
It also includes a forced draft system that constantly moves air through the combustion chamber at a precise flow rate. As a result, all outside weather variables that can affect the heating performance, such as wind conditions, are eliminated - without having to install a high-wind stack.
NOTE: The Hayward Universal H-Series heaters meet the NOx Emission standards set by the California South Coast Quality Air Management Commission for 2001 and the Texas Natural Resource Conservation Commission Code.
How do you clear a CE error on display pad? How do you re-establish the correct communication between the ignition board and display board?
Hi, Nancy. You can follow these steps. A. Power down heater and re-power. This is similar to rebooting a computer. B. If rebooting does not solve the problem, inspect the display interface wiring. Ensure the display interface plug is securely attached to the control module. C. If steps A & B do not resolve the CE error, the Control Board - FDXLICB1930 and/or Display PCB - IDXL2DB1930 are defective and must be replaced.
I currently have an older model of this unit. I have a vertical vent pipe that vents through the roof. Can I operate this newer unit without the vent pipe?
Hi Alvin, This unit will also require a vent kit for indoor installation.
I want to change my CPS 1320 heater to a current model what do you suggest, roughly a 30000 gal pool
Im interested in a pool heater for an outside pool with following dimensions:
30 feet long x 10 feet wide 5.5 feet deep. I have LP gas, and would like to be able to use it in the fall temperatures may be -5 Deg Celsius. Will a 250 be suitable for this pool? I run a single speed 3/4 H.P. pump/filter Thanks!
Hi Emilio, Yes this heater would suit your needs. Based on the information you supplied on your pool you would expect to see a 1-2 degree (Fahrenheit) temperature rise per hour. In the colder months we would definitely suggest a Swimming Pool Solar Cover as this will significantly reduce your operational costs of the heater.
I want to install the Hayward Lownox heater on my pool but I live in the mountains at 3,000 foot elevation; do I need to buy a special high elevation heater?
Hello George, The Hayward Universal Low Nox are self adjusting up to 10,000 feet of elevation. Any installation above 2,000 feet will require a special restriction plate to be installed. Luckily, that plate comes standard with every heater so no need to purchase it separately.
(4 out of 5 stars)
Reviewed By: ALBA from Bell Isle,FL ()
Pros: easy installation. to carry.
Cons: Electical /gas connectins are in the same panel
This is a great heater, I love the small compact size. Is also very quiet, very durable and easy access to work and replace any parts. I would recommend to any pool / spa owner. Hayward products are very reliable,easy to order and friendly sales people to talk too. I will be looking forward to be selling and Installing this product in the future. thanks