Model # H400PED2
By Hayward Pool Products
Model # H400PED2
The Hayward H-Series heater represents the very latest in heating technology for swimming pools and spas. Advanced features include digital touchpad display on all electronic direct spark and induced draft hot surface heaters, rust-resistant water path with polymer header assembly, and a rapid-heat combustion chamber. H-Series heaters are easy to install and maintain, thanks to its low profile, light weight and CPVC plumbing capabilities.
Rust resistant water path, with injection-molded polymer header, offers improved by-pass control and extended life by providing additional protection from the damaging effects of erosion from high flow conditions.
Easy-to-read L.E.D. Control Panel provides digital temperature readout and diagnostics for quick identification of components that might need service.
Heat exchanger reliability is improved due to the reduction of condensation hat can form on tubes. Exclusive CPVC plumbing kit allows for universal heater replacement and maximum plumbing versatility.
Our patented single header "V" baffle design heat exchangers allow for long life, fast heating and virtually no condensation. All Hayward heat exchangers are now protected with highly resilient Cupro Nickel for greater durability and longevity.
Constructed of tough, durable stainless steel, H-Series burners can be removed individually or as a complete unit for easy maintenance and cleaning.
H-Series Thermal Efficiency Rating = 83%
1 year parts and labor limited warranty for single family residential users
For the H-Series installation manual,click here.
Just opening pool. Any reason why water coming out of heater?
Hi, Dal. It's hard to tell specifically where the water is leaking from in the picture, please provide the make model and a wider angle shot.
Where can my heater be installed?
There are specific venting requirements and clearance distances that must be met to ensure proper operation. Consult the owner’s manual for exact specifications for your model of heater.NOTE: Gas fired heaters should be diagnosed and repaired by trained personnel.
What is the difference between an Electronic and Millivolt ignition?
The basic answer is that Millivolt is the old style of ignition, using a standing pilot light. While the electronic ignition uses a spark start system like a gas grill. Electronic ignitions are more efficient in gas usage and also are better suited for high wind areas where a pilot light might get extinguished.
Will a gas heater operate at the low speed of a dual speed motor?
Probably not - Most gas heater will shut off at low GPM levels (20-40) to keep the heater cores from overheating - 20 for 200 BTUs, 40 for 400 BTUs. Depending on your pool system you might get these GPM levels at the low speed but generally these heaters must be run at the motor's high speed.
How do you know if a pool heater is a propane heater or a natural gas heater?
I currently have my pool heater hooked up in series with my pump motor, so that it turns off when the pump turns off.
This heater has a digital control which I'm guessing needs power applied to it at all times. Does this mean I would need to hook the heater up to a separate circuit to maintain it's settings?
We spoke with Hayward and they stated that ideally it would be best to wire this heater to a seperate circuit but since this heater only draws .3 amps that you could wire this in series with your pump.