Union Kit for Max-Flo II (2 Pack) UNIONS ONLY - SPX2700UNKIT



Part # SPX2700UNKIT

By Hayward Pool Products



Part # SPX2700UNKIT

Product Description

Union Kit for Max-Flo II (2 Pack) UNIONS ONLY. Union Connector Kit Includes: 2 Nuts, Connectors and Gaskets. PUMP NOT INCLUDED


?     Asked on 9/24/2018 by F Kaveps

I have Max-Flow VS pump. I noticed in the owners manual it is suggested to remove the pump during the winter months. So my question is, once the pump is removed is there a female plug that I can replace were the pump itself would attach? Long story short, I wan to plug all lines. I have a solution for the Salt generator and the pool cleaner return line, just not the filter pump or the cleaner pump. I have no problems "handcrafting" a solution. Thank you in advance.

A     Answered on 10/25/2018 by InyoPools Product Specialist Lennox H.

Hi, F Kaveps. Once the pump is removed, you can use Winter Plugs to prevent water from getting in. 

?     Asked on 8/16/2018 by Thad

Are 2" inside diameter unions availble for the Max Flow XL? I have 2" plumbing everywhere and would rather not go down to 1.5" at the pump.

A     Answered on 8/16/2018 by InyoPools Product Specialist Lennox H.

Hi, Thad. These union can be used with 1.5" or 2" pvc pipes. 

?     Asked on 1/16/2015 by

How do the gaskets fit on union?

A     Answered on 1/19/2015 by InyoPools Product Specialist Alex V.

Hello, There is a groove on the unions where the o-rings would be placed. I would recommend using a non petroleum based lubricant like Magic Lube to lubricate the o-rings.

?     Asked on 2/29/2012 by Guest

Can you tell me is this 1.5 inch or 2 inch?

A     Answered on 2/29/2012 by InyoPools Product Specialist Patrick P.

The unions are 1 1/2" x 2" CPVC. Depending how you plumb it in you can use either 1.5" PVC or 2" PVC.


Review Summary

  (Average 0 out of 5 stars)
0 Rating
5 star:
4 star:
3 star:
2 star:
1 star: