Model # T101R3
This heavy duty mechanical time switch is designed for industrial, commercial and residential applications. This time switch has the highest horsepower ratings in the industry for loads up to 40 amps resistive from 120 to 480 volts providing direct 24 hour time switch control of most loads.
This series provides 1 to 12 "ON/OFF" operations each day with minimum ON/OFF times of 1 hour. All models are equipped with one "ON" and one "OFF" tripper.
Click here for more Intermatic Timers
I have a T101, can I use it for a new 1 1/2 HP variable speed motor?
This will depend on the voltage required for that variable speed motor. Most are 230 so in that case no, you would need another timer that uses 230 volts.
I see this timer is no longer available. I have model # T 101R. What is the replacement for this timer that is available?? THANKS RON
Hi Ron, You can go with this T101P3 Timer the only difference is that the T101P3 has a plastic enclosure where the T101R3 has a metal enclosure.
can I get an international 110 v w metal enclosure WITH a fireman switch
Hi Norm, Yes you would need the T101R201 - 110V Pool Timer w/ Fireman Switch & Metal Enclosure
will this timer work with a 20 amp circuit breaker
Hi, The Intermatic Timer 110 Volt Metal Enclosure can work with a 20 amp breaker, however what every you have connected to the Timer can't exceed 20 amps.
What are the physical dimensions of this timer?
This Timer Case is 9-3/8"H x 5-1/2"W x 3-5/8"D
Does this timer have knockouts for the electrical and where are they located?
Here is all the information we have regarding the knockouts: Knockouts - Combination 1/2" - 3/4" nominal knockouts, one on the back and each side of case, two on bottom
How many on/off devices come with the unit? I am using this for my eletric hot water heater, I want the heater to come on around 5:00AM and off at 7:00AM, then on again at 5:00PM and off and 7:00PM. So I guess I'm asking can I program two on and off's or do I have to buy something else?
This timer comes with one "On" tripper and one "Off" tripper but can accommodate up to 12 On/Off positions. So to accomplish the following "...come on around 5:00AM and off at 7:00AM, then on again at 5:00PM and off and 7:00PM" You would require the purchase of the timer which comes with 2 trippers, plus the purchase of one additional set of on / off trippers which you may view or purchase here http://www.inyopools.com/Products/02400004003526.htm
My pool pump motor indicates V115/230. Will thistimer accommodate the pool pump? Also,can you tell me the voltage on the clock motor?
Your pump can be wired either 115V or 230V If you have your pool pump wired at 230V than you would want to go with the T104P3 timer if you have the pump wired at 115V than you would want to go with the T101P3 timer. T104P3 timer has a 230V time clock motor and the T101P3 timer has a 115V time clock motor. You may purchase either of these time clocks through the following link http://www.inyopools.com/controls_intermatic.aspx