Model # APURE1400
Warranty 3 Years
AquaPure is a self contained, compact, sanitizing system which fulfills all of your pools sanitizing needs. The AquaPure system utilizes water softening technology to provide wonderfully smooth and gentle-on-the-body water for swimming. Say goodbye to red, irritated eyes, itchy skin, green hair, chlorine odors and even faded swimsuits.
The next generation AquaPure is the ONLY salt chlorine generator that communicates with the AquaLink RS. The AquaLink RS allows for convenient indoor control and monitoring of chlorine production. Complete control — with a touch of a button.Imagine no longer mixing or storing pool chemicals. You will save money, time and have a safer, more healthful backyard paradise.
Click here for more Jandy Aquapure
How do I know what to set the chlorine % at?
Hello Hilary - Our suggestion would be to start at 50% and test the water after a couple of days. Then make the adjustments (+/-) accordingly.
How do I Increase the chlorine % on my controller? When I push the up arrow it just beeps.
The arrow buttons are for increasing or decreasing the chlorine output. The beeping is typically an audible alarm due to the system detecting an issue. Please view the troubleshooting page in the manual here for that.
How do you clean the AquaPure salt cell?
You can use this How to Guide as a reference on cleaning your AquaPure salt cell.
I have an 18' x 36' in ground pool. Can I use the AquaPure 700 or the AquaPure 1400?
The AquaPure1400 would be the correct model for your pool. The AquaPure1400 will treat up to 40,000 gallons.
Do I have to drain my pool to convert to salt if I am using chlorine?
No, you will not need to drain the pool. The salt generator will replace your current chlorine source.
Will the AquaPure stop working in cold weather?
The Jandy AquaPure will stop generating chlorine when the water temperature drops below 50 degrees fahrenheit.
Is the salt included with the salt chlorine generator?
No, salt is not included. You would purchase the salt locally and the quantity will depend upon the number of gallons of water in your pool. Use a salt that is at least 99.8% pure NaCl. The preferred salt is evaporated, granulated, food quality, and NON-iodized. Avoid using salt with anti-caking agents like sodium ferrocyanide, also known as yellow YPS (prussiate of soda). These cause some discoloration of fittings and pool surface finishes. DO NOT use calcium chloride.
I have a pool that is about 10,000 gallons but I am thinking of buying a salt chlorine system for pools up to 20,000 gallons. Would the larger unit be a problem?
It is not a problem to oversize a salt system. It would take the larger unit less time to produce the necessary chlorine so it is actually more efficient. When the pool volume is very close to the capacity of the salt chlorine generator (for example, the pool is 18,000 gallons and the generator is rated at a maximum of 20,000 gallons), we would recommend going up to the next size generator.