Model # 6687RLY
Model # 6687RLY
The AquaLink RS All Button allows automatic control of your swimming pool and spa. With custom labeled buttons of all equipment you will be able to easily understand and control your pool system. Your swimming pool and spa are your own private paradise and the Jandy AquaLink RS Control System puts that paradise at your fingertips.
Systems Include: Indoor Control Panel, up to 4 Power Center Bezels
with Printed Circuit Boards, 2 Jandy Valve Actuators 24V (pool and spa combo
models only), 1 Water Temperature Sensor, and 1 Air/Solar Temperature Sensor
and all necessary 3HP relays required to operate system. Systems require one
or more power centers, cable or wireless kit.
Click here for more Jandy Aqualink
How do you set time on and time off for the pool.
Hi Victor, Page 10 of this Jandy AquaLink Owner's Manual explains this in detail.
I cannot get my spa to operate, the lights are on heat and spa more the over spill keep running.
Hi, Victor. It sound like it could be a bad relay, I would recommend having a tech inspect the unit just to be sure.
How do I delete a program of the filter pump staying on way too long
Hello Lynn, if you need to talk to tech from Jandy 800-822-7933 to recalibrate or run diagnostics.
Rs8 aqualink How do you cancel a program step by step
Hello, Please refer to page 21 of the owner's manual: http://www.inyopools.com/manuals/259/jandy_controls_all_button.pdf
how do you delete pool heater programs?
Hi, You can find the instructions on page 21 of the Jandy Controls All Button Owners Manual.
How do I program spa remote functions such as booster, air, etc?
Hi Tim, You can find programming instructions in the Aqualink RS All Button Control System Owner's Manual.
How do I reset the start and stop time of the pool going on
Hi Elaine, You can find the instructions on page 10 of the Jandy Controls All Button Owners Manual.
How do you delete old programs for the filter pump?
All Button Controller. Pressing the reset switch, located on the left side, will momentarily display the software part numbers and revision letters for both the controller's micro controller chip and the power center's fi rmware chip. The reset switch also resets the micro controller, but does not remove any programming, AUX labels, etc. 2. OneTouch Controller. The reset switch can be used to show the revision code for the fi rmware for both the controller's micro controller chip and the power center's fi rmware chip.
How do you reprogram the clock
Please review page 11 of the manual here for directions on programming the clock.
Hello - I belieive this is the manual you are looking for. Please click HERE.