Model # LRZ250MN
With 60 years experience as the No. 1 selling brand of pool heaters – Jandy’s new Legacy Heater is designed for today’s discerning market. Available in two models, the Legacy LRZE (electronic ignition) heater features a technologically-advanced dual-thermostat control, and the LRZM (millivolt ignition) model features a single control with easy on/off switch.
Whichever model you select, it’s sure to provide years of dependable service. With our industry-leading 24-point quality check system, you can depend on Legacy’s performance and reliability year after year, season after season.
The Pool Sizing Guide shows the maximum pool surface area our Legacy models will heat based on the temperature difference between the air temperature during the coldest month the pool is used and the desired pool temperature. Figures are based on average wind conditions and average pool depth.
The Spa Sizing Guide details the time required for each model to raise spa temperature by 30°F.
Replacement for Jandy Lite2™ heaters.
*ASME® Certified models available.
I currently have a 10 year old Jandy LT 250 heater. When the pool co. opened the pool yesterday everything went well except the heater. the rep said the blower would not come on and suggested I replace the blower. Your web site shows a new one for $438.99. Since mine is 10 years old, would it be better to purchase a new heater? If so, which model do you recommend?
Curt, It will be better to replace your 10 year old heater, rather than fixing it. To get your the correct replacement we'll need to know if you have propane or natural gas and whether you want an electronic or milivolt ignition. Please reply.
What is the difference between an Electronic and Millivolt ignition?
The basic answer is that Millivolt is the old style of ignition, using a standing pilot light. While the electronic ignition uses a spark start system like a gas grill. Electronic ignitions are more efficient in gas usage and also are better suited for high wind areas where a pilot light might get extinguished.
Will a gas heater operate at the low speed of a dual speed motor?
Probably not - Most gas heater will shut off at low GPM levels (20-40) to keep the heater cores from overheating - 20 for 200 BTUs, 40 for 400 BTUs. Depending on your pool system you might get these GPM levels at the low speed but generally these heaters must be run at the motor's high speed.