Jandy E-Pump Remote Controller (DS) - JEPR

THIS PRODUCT IS NO LONGER AVAILABLE

Part # JEPR

By Jandy

  5 Average  

Details

Top

Part # JEPR

Alternate Part #'s JDY-30-2070, JDYJEP-R, JEP-R

Product Description

ePump™ Remote Controller

• Includes two (2) timers and eight (8) preset speeds that can be custom labeled
• LCD display & LED indicators
• Pump priming & freeze protection
• Global RPM limiter

Top

?     Asked on 10/12/2017 by Mark

Does the Jandy E-Pump Remote Controller (DS) work both with the 1.5 hp and the 2 hp Jandy E pumps?
 Reply

A  Answered on 10/12/2017 by InyoPools Product Specialist Lennox H.

Hi, Mark. Yes, the Jandy E-Pump Remote Controller will work with both the 1.5 an 2 hp pumps.
 Reply


?     Asked on 2/1/2016 by mike

does the wire that connects to the pump come with replacement controller
 Reply

A  Answered on 2/2/2016 by InyoPools Product Specialist Megan C.

Hello, Mike. No, the Cable, 4 Conductor, Per Ft. (4278) PART# 9238-15A is not included. Click here to view.  Please refer to the Jandy JEPR Owner's Manual / INSTALLATION AND OPERATION MANUAL or click here.
 Reply


?     Asked on 5/21/2015 by James Bennett

I have the Jandy E pump controller. It has remote contacts available. So what can be attached to this. I mounted mine in my shop away from the pool equipment. it is very hard to jump back and forth. Can a wireless controller be connected to these remote terminals. Please advise James Bennett
 Reply

A  Answered on 5/21/2015 by InyoPools Product Specialist Patrick P.

The remote contacts are for operation through a switch or a relay. You may find more detail on this in section 2.8 of the Jandy JEPR Owner's Manual.
 Reply


?     Asked on 4/24/2015 by Clark

Does the Zodiac remote part # JEP-R have a battery back up? How often does the battery last? Thanks
 Reply

A  Answered on 4/24/2015 by InyoPools Product Specialist Wes B.

Hi Clark, This controller is not battery operated. It is directly wired to a variable speed pump.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

We swittched pumps and needed to also change the controller.

Written on 6/26/2018 by Guest

We replaced our 2 HP pump with a new Jandy Variable pump and once the switch was made we attached the controller to the pump.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews