Model # 520098
By Pentair Pool Products
Model # 520098
Manufacturer Code 521889
Alternate Part #'s 521889
The iS4 Spa-Side Control can be used with the Pentair® IntelliTouch®, EasyTouch® Control Systems and the Compool® CP series Control Systems to provide remote switching of four control circuits from the spa location. It is typically used for activating spa circulation and three auxiliary pieces of equipment (such as lights, jet pump, air blower, etc.). One iS4 spa-side control can be installed per control system. It is possible to install two iS4 remotes on a single control system, however, the two iS4 remotes will mirror each other in functionality. The iS4 spa-side remote is a double-insulated device UL and ETL listed to UL 1563. It is splash-proof and weatherproof but should not be permanently submerged below the spa water level. The iS4 remote must be installed above the highest sustained water level.
Pentair 4-Button Spa-Side Remote Control, Voltage Rating: 5 VDC, ABS, White, Cable Length: 250 ft, 2 mA, For Use With: Pentair IntelliTouch(R), EasyTouch(R) Control Systems and the Compool(R) CP Series Control Systems
I have an old Compool spa side remote which is round with 3 push buttons, the rear fitting has a male 1 1/2" thread and screws into a wall fitting. Will this remote replace my old Compool remote?
The IS4 spa side remote is designed as a direct replacement for the older Compool 3 button spa side remote.