UltraTemp 140 Heat Pump 143,000 BTU - Almond - 460934

$3,599.99

IN STOCK
FREE SHIPPING

Part # 460934

By Pentair Pool Products


Details

Top

Part # 460934

Warranty SEE WARRANTY CARD

Rebate $200 Visa Gift Card

Product Description

"Extend Your Summer" $200 Visa Gift Card (Valid through September 1, 2017 - December 31, 2018)

UltraTemp ® High Performance Heat Pump

 

Simply the most economical way to heat your pool and spa. With today's record energy costs, there's never been a better time to invest in a heat pump. Compared to gas, oil or electric heaters, UltraTemp uses just a fraction of the energy to generate the same amount of heat.

An Eco Select ™ Brand: UltraTemp ® High Performance Heat Pumps transfer heat from the atmosphere to the pool or spa, saving up to 80% in energy costs compared to gas-fired heaters. Plus, they are the only heat pumps available that use R-410A refrigerant, EPA-recognized as environmentally safe and clean.

Features

  • 100% titanium heat exchanger assures corrosion-free performance for extra long life and value.

  • LCD control board displays an intuitive, menu-driven readout with easy to follow, full word messages - no more codes.

  • AutoSet (time clock over-ride) feature monitors water temperature and turns the water circulation pump on and off as needed to maintain desired pool temperatures

  • Automatic defrost feature senses refrigerant temperature and prevents UltraTemp from freezing, allowing the heat pump to operate at even lower temperatures

  • Compatible with All automated control packages

  • Long-life corrosion resistant plastic composite cabinet stands up to severe climates and pool chemicals

  • Emerson Copeland Scroll Compressor

  • ETL listed for safe operation

  • Thermostatic Expansion Valve (TXV) controls refrigerant flow for optimum efficiency and BTU output over a wider operating range

  • Highest efficiency available, meets or exceeds existing codes and standards

  • BTU and efficiency performance independently certified by the Air-Conditioning, Heating and Refrigeration Institute, AHRI 







For More Swimming Pool Heat Pumps

Product Specifications

BTU:
143,000 BTU
Coefficient of Performance:
5.5
Volts:
230
Hz:
60 Hz
Phase:
Single
Recommended Breaker Size:
50
Compressor:
Scroll
Heat Exchanger:
Titanium
Special Feature:
Almond
Top

?     Asked on 10/12/2018 by

does Pentair make a cover for their pool heaters?
 Reply

A  Answered on 10/12/2018 by InyoPools Product Specialist Lennox H.

Hi. Pentair does not have a cover for their heat pumps. You can use the Pool Heat Pump Cover - One Size Fits All - OSCS-HC for this unit. 
 Reply


?     Asked on 9/29/2018 by Frank

What is the lowest ambient temperature this model will be effective. Hopefully 40 degrees?
 Reply

A  Answered on 10/2/2018 by InyoPools Product Specialist Lennox H.

Hi, Frank. This unit will not operate below 50 degrees ambient temperature. 
 Reply


?     Asked on 9/20/2018 by Rhonda M Gibson

How much does this unit weigh?
 Reply

A  Answered on 9/20/2018 by InyoPools Product Specialist Hector F.

This unit weighs approximately 300 lbs. 
 Reply


?     Asked on 7/27/2018 by John

How close can the unit be placed to the side of the house?
 Reply

A  Answered on 8/2/2018 by InyoPools Product Specialist Lennox H.

Hi, John. This unit must be at least 6" from a building rear and 24" on the sides and front.
 Reply


?     Asked on 7/24/2018 by Melanie Poelma

Sorry another question, the spa is seperate from the pool (2 bodies of water) can it still heat both?
 Reply

A  Answered on 7/24/2018 by InyoPools Product Specialist Lennox H.

Hi, Melanie. Yes, it can if plumbed correctly. 
 Reply


?     Asked on 7/24/2018 by Melanie Poelma

Hi, Now that I know it can heat both a pool and spa does it have to heat them one at a time or can it do it simultaneously? Thanks!
 Reply

A  Answered on 7/24/2018 by InyoPools Product Specialist Lennox H.

Hi, Melanie. It cannot heat both the pool and spa simultaneously, it will only heat one body of water at a time. 
 Reply


?     Asked on 5/23/2018 by Robert Blizniak

How long will it take for a pool that is 13000 gallons to go from 68 degrees to 82?
 Reply

A  Answered on 5/25/2018 by InyoPools Product Specialist Lennox H.

Hi, Robert. They are several variables that you'll need to factor in like air temp, humidity, flow rate etc. It can take about approximately 12 hours or more to heat your pool to 82 degrees in good operating condition. 
 Reply


?     Asked on 5/9/2018 by

Does this unit also chill the water? I live in Florida and want a unit that can chill the water during the hot summer months,
 Reply

A  Answered on 5/10/2018 by InyoPools Product Specialist Hector F.

No, this is not a chiller model. The version of this unit with a chiller would be model 460959 which currently is a special order of about a 2-3 week lead time. 
 Reply


?     Asked on 5/7/2018 by

what are the demensions of this heater
 Reply

A  Answered on 5/7/2018 by InyoPools Product Specialist Lennox H.

Hi. The Dimensions are 45.5” H, 38.7" D, 30.7" W. 
 Reply


?     Asked on 7/16/2017 by Richard

What is the electrical service required? 110 or 220 ?
 Reply

A  Answered on 7/16/2017 by InyoPools Product Specialist Lennox H.

Hi, Richard. This unit requires a 60 amp 230 volt breaker. 
 Reply


?     Asked on 4/24/2017 by Mauricio

Hello I have a pool that measures 25 meters long, 20 meters wide and the average height is 2.37 meters. It has a total of 307882 gallons I would like to know which heat pump and how many BTU I need to install it in my pool. I look forward to your response. Greetings
 Reply

A  Answered on 4/24/2017 by InyoPools Product Specialist Scott W.

With a pool that size you would need at least two of those UltraTemps.
 Reply


?     Asked on 8/27/2016 by ed

how much electricity does it use per month kilowatt hours
 Reply

A  Answered on 8/29/2016 by InyoPools Product Specialist Alan M.

Unfortunately we do not have any way to determine the Kw per hour/month. The temperature of the water, desired temperature, cover/no cover, wind, and pool run time are all factors in determining the length of time the heater will run daily, let alone the run time per month. If it helps, here is a manual for the Pentair Ultratemp Heat Pump and if you need more technical assistance, you can call the manufacturer directly at 1-800-831-7133.
 Reply


?     Asked on 6/27/2016 by

weight - height
 Reply

A  Answered on 6/28/2016 by InyoPools Product Specialist Alan M.

The weight of this unit is approximately 300 lbs.The height is 45.5".
 Reply


?     Asked on 6/27/2016 by

weight of this product??
 Reply

A  Answered on 6/28/2016 by InyoPools Product Specialist Alan M.

The weight of this item is approximately 300 lbs.
 Reply


?     Asked on 6/22/2016 by

free shipping - does this include HawaII
 Reply

A  Answered on 6/22/2016 by InyoPools Product Specialist Lennox H.

Hi, Unfortunately, free shipping applies only if the unit is being shipped within the continental USA. You will have to get this unit shipped to a freight forwarder, which will qualify for the free shipping.
 Reply


?     Asked on 5/14/2016 by Larry Combs

what is the differance in 3 phase and 1
 Reply

A  Answered on 5/17/2016 by InyoPools Product Specialist Lennox H.

Hi Larry, The difference between three and single phase is the power connection. Three phase uses a 4 wire connection and single phase uses a 3 wire connection.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)