By Pentair Pool Products


Details

Top

Part # 178546z

Alternate Part #'s _178546Z

Product Description

Your Source for Swimming Pool & Spa Parts With 40,000 Parts in Stock - INYOpools.com

Top

?     Asked on 12/8/2015by jack

What is your return policy if it doesn't fit?
 Reply

A  Answered on 12/8/2015 by InyoPools Product Specialist Charlie R.

Jack,You have 30 days to return a part as long as it is new and unused condition. You can review our full return policy here.
 Reply


?     Asked on 11/6/2018by George L. Cartagena

I ordered a 75/150/200 lid and it is the same size as the one I am replacing; however, the new lid does not go past the body O ring, I have tried different ways including oils, grease, etc and nothing works. I measured the diameter of the lids and are both the same. The old lid fits fine, but the new one..no way. Any advise?

 Reply

A  Answered on 11/6/2018 by InyoPools Product Specialist Hector F.

Sometimes you may need to release the air pressure from within the lid and body by opening up the air relief valve on the lid before you install. Also, sometimes over the years and pressure changes the base may slightly contract and expand making the lids not able to fit correctly. 
 Reply


?     Asked on 7/18/2020by Bill Black

will this lid fit on American Products Predator or do you have one that will? it is a 75 square ft filter
 Reply

A  Answered on 11/17/2020 by InyoPools Product Specialist Hector F.

Hi Bill, the part number for the Pentair Predator 75 sq. ft. cartridge filter models manufactured after 11-1998 is part number 4652-01C. If you are not sure of the manufacturer date you can use the serial number and contact Pentair to confirm. 
 Reply