By Pentair Pool Products


Details

Top

Model # 70100120

Manufacturer Code AK110PS-C

Product Description

The most highly advanced single-pool controller in the industry! With its connection options the AK110 ™ controller provides unsurpassed water management to any aquatic facility operator, fulfilling all requirements of the facilities pool, spa or other water features. Programmable features complete the AK110 package for continuous monitoring of pH, ORP, disinfectant levels, temperature and flow rate. The bidirectional control of the AK110 allows water chemistry changes to be made immediately from a computer anywhere in the world.

Features:

  • AcuCom ™ Software
  • pH, ORP and temperature sensors
  • Programmable pH, ORP and temperature set points
  • Programmable chemical feed cycle ON and OFF (MIX) times
  • Programmable proportional feed
  • Programmable acid, base or CO2 feed for pH control
  • Relay configuration shortcuts with Acu-Trol ® Wizards
  • Flow cell with built-in flow switch, shut-off valves,
    inlet strainer and sampling port
  • Records up to 30 days of sensor data internally in 1 or 2 hour recording intervals
  • Sensors
    The AK110™ is capable of measuring ORP, pH,
    free chlorine, temperature and flow rate.
  • Flow Cell
    The AK1200™ offers inlet and outlet valves for sensor
    protection and ease of water sampling.
  • Data Recording
    Up to thirty (30) days of data storage. In the absence of
    power the AK110 will retain programming information,
    calibration and recorded data.
  • Alarms
    Alarms are activated by sensor measurements and will
    communicate every two hours until alarm is cleared.
    • pH Alarms
    pH set point ± .5
    Overfeed disables pH feed
    Flow switch disables pH feed
    High pH disables disinfectant feed
    • ORP Alarms
    ORP set point ± 75mV
    Overfeed disables disinfectant feed
    Flow switch disables disinfectant feed
  • Communication
    The AK110 communicates with AcuManage II™ and the
    AcuCom™ software package. Optional modem modules
    provides wireless or wired communications.
  • Security
    Password limits access to ensure programming protection.

Options:

  • AcuPort™ Connectivity
    Ethernet, WiFi or RS422/485
  • Wireless Communication
    Wireless GPRS where phone lines are not accessible
  • AcuManage II™ Website
    Notification alarms and sensor readings
    AcuManage II available via wireless or AcuPort communication only
  • AKColor™ Sensor
    The AKColor colorimetric sensing system measures PPM
    of free chlorine with the DPD (N, N-DIETHYL-P-PHENYLENEDIAMINE)
    test
  • Absorb It™
    The Acu-Trol’s Absorb It system for the use of CO2 for optimal
    pH and alkalinity control
  • Optical Level Sensor
    Measurement and automatic control of water level
  • Digital Flow Sensor
    Displays flow rate in gallons per minute
  • High Amp Relay (HAR1)
    Control of high current loads
  • Real Time Clock
    Time and day stamps for sensor data logging
  • Premounting
    Mounted on easy to install polypropylene predrilled board

Programmability

  • Proportional feed
  • Feeder ON/MIX times
  • Mix/Cycle times
  • Overfeed lockout times
  • pH, ORP and temperature set point
  • ORP and pH calibration
  • Colorimetric PPM measurement
  • Temperature calibration
  • Heater control
  • Acid/Base feed
  • Disinfectant feed
  • Four pager numbers via dial-up modem
  • Four email addresses via wireless modem
  • Master & service passwords
  • Event alarms

 

Product Specifications

ORP Reading:
0 to 999 mV
pH Reading:
4.22 to 9.70
Free Chlorine Reading:
0 to 9.99 PPM
Temperature Reading:
32 to 212 °F
Flow Switch:
Yes
Flow Rating:
0 to 65,535 GPM
Free Chlorine Inputs:
1
Flow Switch Inputs:
1
Flow Rating Inputs:
2
ORP Inputs:
1
pH Inputs:
1
Temperature Inputs:
1