Product Description

The most highly advanced single-pool controller in the industry! With its connection options the AK110 ™ controller provides unsurpassed water management to any aquatic facility operator, fulfilling all requirements of the facilities pool, spa or other water features. Programmable features complete the AK110 package for continuous monitoring of pH, ORP, disinfectant levels, temperature and flow rate. The bidirectional control of the AK110 allows water chemistry changes to be made immediately from a computer anywhere in the world.

Features:

• AcuCom ™ Software
• pH, ORP and temperature sensors
• Programmable pH, ORP and temperature set points
• Programmable chemical feed cycle ON and OFF (MIX) times
• Programmable proportional feed
• Programmable acid, base or CO2 feed for pH control
• Relay configuration shortcuts with Acu-Trol ® Wizards
• Flow cell with built-in flow switch, shut-off valves,
  inlet strainer and sampling port
• Records up to 30 days of sensor data internally in 1 or 2 hour recording intervals
• Sensors
  The AK110™ is capable of measuring ORP, pH,
  free chlorine, temperature and flow rate.
• Flow Cell
  The AK1200™ offers inlet and outlet valves for sensor
  protection and ease of water sampling.
• Data Recording
  Up to thirty (30) days of data storage. In the absence of
  power the AK110 will retain programming information,
  calibration and recorded data.
• Alarms
  Alarms are activated by sensor measurements and will
  communicate every two hours until alarm is cleared.
  • pH Alarms
  pH set point ± .5
  Overfeed disables pH feed
  Flow switch disables pH feed
  High pH disables disinfectant feed
  • ORP Alarms
  ORP set point ± 75mV
  Overfeed disables disinfectant feed
  Flow switch disables disinfectant feed
• Communication
  The AK110 communicates with AcuManage II™ and the
  AcuCom™ software package. Optional modem modules
  provides wireless or wired communications.
• Security
  Password limits access to ensure programming protection.

Options:

• AcuPort™ Connectivity
  Ethernet, WiFi or RS422/485
• Wireless Communication
  Wireless GPRS where phone lines are not accessible
• AcuManage II™ Website
  Notification alarms and sensor readings
  AcuManage II available via wireless or AcuPort communication only
• AKColor™ Sensor
  The AKColor colorimetric sensing system measures PPM
  of free chlorine with the DPD (N, N-DIETHYL-P-PHENYLENEDIAMINE)
  test
• Absorb It™
  The Acu-Trol’s Absorb It system for the use of CO2 for optimal
  pH and alkalinity control
• Optical Level Sensor
  Measurement and automatic control of water level
• Digital Flow Sensor
  Displays flow rate in gallons per minute
• High Amp Relay (HAR1)
  Control of high current loads
• Real Time Clock
  Time and day stamps for sensor data logging
• Premounting
  Mounted on easy to install polypropylene predrilled board

Programmability

• Proportional feed
• Feeder ON/MIX times
• Mix/Cycle times
• Overfeed lockout times
• pH, ORP and temperature set point
• ORP and pH calibration
• Colorimetric PPM measurement
• Temperature calibration
• Heater control
• Acid/Base feed
• Disinfectant feed
• Four pager numbers via dial-up modem
• Four email addresses via wireless modem
• Master & service passwords
• Event alarms