$3,616.99

Qty:

By Raypak


Details

Top

Model # 010199

Warranty 1 Year

Alternate Part #'s BR266AENX, RAY-15-0292, RAY017400

Product Description

Enjoy your pool......Extend your swim season
Your pool and spa is a long-term investment that you, your family and friends will enjoy year after year. Now, there's an easier way to enjoy that investment more often, more reliably and more efficiently throughout the year...the Raypak Digital pool and spa heater.

Think about being able to use your pool or spa at the perfect comfort level even when Fall arrives...or when the first chill of Winter is felt in the wind...or in the Spring or Summer when evenings can turn chilly in a minute! Helping you get more enjoyment from your pool or spa is the smart idea behind the Raypak Digital.

Elevation: 0 Ft. – 2000 Ft. Click Here for High Altitude Pool Heaters

Digital Controls

  • Microprocessor Controlled Thermostat

The Raypak Digital gas heater comes with a microprocessor based thermostat control. This control allows you to set your pool or spa temperature precisely at your favorite setting just by pressing an up or down temperature control button. The Digital display gives you a constant read out of your pool water temperature. Just set it, and forget it! Truly simple.

  • Self Diagnostic

Troubleshooting a gas heater has never been easier. The Raypak Digital has on-board diagnostic controls that let the user and the service professional know what is going on with the heater at all times. In the event that you would ever have a problem with the heater, the digital display will show where the problem is in the control circuit. It's like having a service technician built into every heater!

  • Remote Compatible

The Raypak Digital is compatible with most major pool control and remote systems on the market today. Any two-wire or three-wire remote can connect to the Raypak Digital and be integrated into the pool control system of your choice.

Wind Resistant

  • Built-in Wind Resistant Design

The Raypak Digital has the best outdoor design in the market today. With over 50 years in designing and building gas heaters, Raypak has put all that experience into its newest heater design. No need for fans to combat drafting problems, the Raypak Digital was designed for outdoor installations with its exclusive low profile design. It is so thoughtfully and carefully designed it actually protects itself from the things that tend to stifle ordinary pool and spa heaters: falling leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow, etc. In fact it is so efficiently designed it ensures uninterrupted heating performance regardless of all but the most extreme weather conditions. Built Raypak tough. Built to last.

Cabinet

  • Smart Design

One look will tell you that the Raypak Digital is different! The look is contemporary. The design is advanced. And inside and out it's engineered to last. The attractive forest green and charcoal gray panels complement the latest pool and spa equipment designs. Raypak's original "pagoda top" design will keep the heater operating even in extreme wind conditions and downdrafts.

  • Polytuff Powder Coating

The Raypak Digital has a polyester coated, non-corrosive cabinet that is more durable than solventborne and waterborne coated metal cabinets. Every piece of sheet metal that gets powder coated goes through a 7-stage wash system making certain the powder paint has a perfect bond. Underneath the tough and beautiful finish you will find galvanized metal that offers superior rust prevention and years of durable service.

Non-Corrosive Waterways

  • Glass-Lined Cast Iron Headers

Raypak has applied its years of commercial boiler experience to the design of the cast iron glass-lined header. A metal header design allows for the higher working pressures required by ASME. Only after the material meets the stress analysis and metal composition tests is it approved for use in an ASME unit.

  • ASME Copper Fin Tube - Commercial

The Raypak Digital ASME is designed specifically to meet State and local code requirements for public pools and commercial applications. This heater is equipped with a thicker walled fin tube allowing it to meet the ASME certification requirements.

  • Cupro-Nickel Fin Tube - Specialty

Raypak Digital heaters can be ordered with cupro-nickel fin tube heat exchangers for added protection against aggressive water chemistry. Although rare, there are certain applications, like health club spa’s, where copper is just not the best choice. Cupro-nickel offers superior tolerance to bad and fluctuating water chemistry, thanks to a harder surface and a thicker walled fin tube. 

Product Specifications

BTU:
266,000 BTU
Certification:
ASME
Ignition:
Electronic
Digital Readout:
Yes
Heat Exchanger:
Cupro-Nickel
Plumbing Size:
2 in.
Manufacturer:
Raypak
Heater Type:
Natural Gas
Top

?     Asked on 1/16/2012by Guest

Will a gas heater operate at the low speed of a dual speed motor?
 Reply

A  Answered on 1/16/2012 by InyoPools Product Specialist Patrick P.

Probably not - Most gas heater will shut off at low GPM levels (20-40) to keep the heater cores from overheating - 20 for 200 BTUs, 40 for 400 BTUs. Depending on your pool system you might get these GPM levels at the low speed but generally these heaters must be run at the motor's high speed.
 Reply


?     Asked on 10/10/2012by Guest

What is the difference between an Electronic and Millivolt ignition?
 Reply

A  Answered on 10/10/2012 by InyoPools Product Specialist Patrick P.

The basic answer is that Millivolt is the old style of ignition, using a standing pilot light. While the electronic ignition uses a spark start system like a gas grill. Electronic ignitions are more efficient in gas usage and also are better suited for high wind areas where a pilot light might get extinguished.
 Reply


?     Asked on 7/21/2019by Robert

ASME CERTIFICATION: According to detailed information the ASME pressure requirements need a cast iron header to qualify. However specs say it has ASME certification with polymer headers. Please clarify.
 Reply

A  Answered on 7/23/2019 by Industry Professional

This ASME unit does have Glass-Lined Cast Iron Headers.
 Reply


?     Asked on 7/22/2019by Robert

ASME CERTIFICATION: According to detailed information the ASME pressure requirements need a cast iron header to qualify. However specs say it has ASME certification with polymer headers. Please clarify.
 Reply

A  Answered on 7/23/2019 by InyoPools Product Specialist Michelle B.

Hi, Robert. This ASME unit does have Glass-Lined Cast Iron Headers. We've updated the info in the Product Detail/Description.
 Reply


?     Asked on 7/22/2019by ROBERT WYSOCKI

Is polymer header for heat exchanger ASME approved? Thought Raypak literature states it requires Cast iron to meet pressure requirements.
 Reply

A  Answered on 7/23/2019 by InyoPools Product Specialist Hector F.

ASME units come standard with cast iron headers. 
 Reply


Top

Review Summary

 (Average 2  out of 5 stars)
1 Ratings
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(1)
1 star:
 
(0)