APPLICATION:
This is a machined aluminum anchor flange suitable for use in surface (deck) mounting a variety of equipment including slides, ladders, handrails and stair rails on light to moderate duty residential and light duty commercial installations in most geographic areas.

STANDARDFEATURES:
The .3" (7.9mm) thick. machined aluminum Anchor Flange Assembly provides a suitable mounting point when surface mounting light to moderate duty residential and light duty commercial equipment whose outer diameter tubing is 1.9" (48.3mm). The 3.25" (82.6mm) deep mounting tube provides a substantial mounting sleeve while the 5.25" (133.4mm) diameter base provides a stable platform. The base is symmetrically predrilled to accept four mounting bolts of a diameter of 1/4" (.25"/6.4mm) (not included). In addition, either side of the mounting tube is predrilled at approximately 1" (25.4mm) below the top of the mounting tube. Mounting of equipment is accomplished by properly aligning these holes with matching holes in equipment and securing with a 2.75" (69.9mm) long bolt. This carbon steel bolt, a bushing, two washers and a lock nut (U.S. thread) are included with the anchor socket.