$1,104.99
By S.R. Smith
Model # 6820958663
The Frontier II board is available in 6 ft. and 8 ft. lengths. The board is intended for light to moderate use on residential swimming pools. Frontier II boards consist of one, wide laminated, wood core runner that extend along the entire length of the board. The board's durable acrylic outer surface will not scratch or fade — providing many years of recreational enjoyment.
Frontier II boards come in combination with the Frontier II Jump Stand. The Frontier II jump stand is a radiant white, powder-coated, opposing force steel spring that produces good board action and a clean look. Stand is intended for use only with the 6-foot (1.83m) and 8-foot (2.44m) Frontier II board and comes complete with Uni-Mount jig and stainless steel hardware to simplify, ease and quicken installation.
Available in the following colors:
Diving Board Dimensions:
Jig Dimensions:
Click here for more Diving Boards
What size diving board can I use on my pool?
Reply
Page 2 & 3 of this document http://www.inyopools.com/owners_manual/SRSmith_Cat_standard.pdf will give you the minimum residential pool requirements for all of our SR Smith Diving Boards.
Reply
I've had to replace the stand twice. Is there a heavier duty replacement stand that uses the same bolt pattern? I take the board and stand off each winter as one unit. The stand always cracks between the back two bolt holes. Could I be bolting it down wrong?
Reply
There is no other Spring Stand which you could use as a replacement. One possibility would be to go with the SR Smith Cantilever Stand and Board, this is a much sturdier and rugged board but you would get less bounce. The board and base combination would not use the same bolt pattern so you would need to purchase the S.R. Smith Epoxy Kit, this would require that you cut your existing bolts flush with the deck. You would then drill 4 holes in your deck and apply epoxy to the 4 bolts which come in the kit; you would then stick these 4 bolts into the deck so you will now have 4 new bolts sticking up out of your deck which can accommodate the new Cantilever stand. Thanks for the great question!
Reply
I have a need for a diving board with a higher weight capacity than 250 pounds. Is there one available that can handle a person around 300 pounds?
Reply
The S.R. Smith U-Frame coupled with the Frontier IV Diving Board has a weight capacity of 400 ponds.
Reply