$395.99
Part # 342082015
Warranty 1 Year
Dimensions 16" L x 7.5" W x 6.5" D
Alternate Part #'s 34-270-3620, 3420820-15, WW342082015
The Waterway Center Discharge 48-Frame pump is the perfect replacement for most center discharge applications. It has reliable performance. It features 1-1/2" intake and discharge and a rotatable wet end for easy installation.
Spa Pump Features:
| Manufacturer | Waterway |
| Pump Model | E-Series Center Discharge |
| Speed | 2 Speed (2-Spd) |
| Motor Voltage | 230v |
| Drain Plug Location | 3,6,9 o`clock |
| Suction Style | Center |
| Suction Connection Type | Female Pipe Thread (fpt), Male Buttress Thread (mbt) |
| Suction Pipe Size | 1-1/2" |
| Discharge Style | Center |
| Discharge Connection Type | Female Pipe Thread (fpt), Male Buttress Thread (mbt) |
| Discharge Pipe Size | 1-1/2" |
| Horsepower | 2.0hp |
| Motor Frame | 48 Frame Thru-Bolt |
| Motor Amperage/Wattage | 10.5A/2.6A |
Note: This new E-Series version replaces the old style Waterway center discharge pump
**Warning - OEM pump manufacturers may change motors and styles without notice. Pumps may be with or without a run capacitor.**
At what temp should the pool pump SN141106 7813 run at( temp of the. Motor)
Reply
Typical motor temp is 140 degrees, or possibly hotter depending on the state you live. If it runs for a short while, shuts off , and turns itself back on it is overheating and the thermal protection is kicking in. If that is the case, please check the air vents around the motor to make sure they are clear of debris.
Reply
How many gallons per minute discharging at both low and high speed? What is the overall length of the motor?
Reply
Hi C. Bazzy, If this pump is being used on a portable spa then under normal plumbing conditions this pump will output roughly 110 GPM on the high speed and 35 GPM on the low speed.
Reply
