Model # 52216106
The port that says waste should a hose be connected to that when filtering
Hi, You can connect a hose to the "waste" port so when you backwash the filter the waste is not dumped near the equipment.
can you just purchase a new motor without the filter
A replacement motor for that pump is part number BN37.
How many GPH does the pump put out? Also, is it sufficient for a 16'x32' x4.5' intex above ground pool?
Hello, Robert the gallons per minute for this unit on high speed and low speed would vary between 45-65 GPMS. This unit would be a little small for your pool.BS5205340-6S wOULD BE A BETTER FIT FOR YOUR POOL. aND YOU WOULD BE ABLE TO RUN THE PUMP ON LOWER SPEED WITH NO ISSUE.