Basket Assy., Upper Standpipe (88158001r000)

$42.99

IN STOCK
FREE SHIPPING

Part # 4625-03

By Jacuzzi Inc.


Details

Top

Part # 4625-03

Manufacturer Code 88158001R

Dimensions 5.1" L x 5.1" W x 3.75" D

Alternate Part #'s 88158001

Product Description

BASKET ASSY., UPPER STANDPIPE
Top

?     Asked on 5/26/2019 by jim

I see the upper pipe says obsolete, does this basket take care of that.
 Reply

A  Answered on 5/26/2019 by InyoPools Product Specialist Lennox H.

Hi, Jim. You can use the Top Mount Valve, Jacuzzi DV6/DV7 Bolt-On Generic - TM-12-JL7 which will allow you not to use those other components and connect it directly to the standpipe.
 Reply


?     Asked on 4/27/2019 by John spencer

Is the basket assembly removable. Mine is stuck & will not move? How do I get it out to vacuum out sand for change out.
 Reply

A  Answered on 5/4/2019 by InyoPools Product Specialist Lennox H.

Hi, John. This Basket Assembly is removable. To remove the basket from the standpipe, just pull it off. You may have to wiggle it until it comes loose.  
 Reply


?     Asked on 8/3/2018 by Christine Tobin

Is there some black flap in between the bottom of the upper pipe stand and the basket? Or is it supposed to be open
 Reply

A  Answered on 8/3/2018 by InyoPools Product Specialist Lennox H.

Hi, Christine. There is not a flap between the bottom of the upper pipe stand and the basket. 
 Reply


?     Asked on 10/19/2016 by Matt

having trouble getting the basket off standpipe. do you really need it? was thinking about having to break it off.
 Reply

A  Answered on 10/19/2016 by InyoPools Product Specialist Stacey M.

Hello Matt, You do need a basket for the assy to connect to diverter flow for the top part of your sand filter.
 Reply


?     Asked on 9/17/2015 by Ian King

I'm having difficulty removing the basket from the stand pipe. Is this basket screwed onto the stand pipe? is it glued or is it friction fit?
 Reply

A  Answered on 9/21/2015 by InyoPools Product Specialist Lennox H.

Hi Ian, The Upper Standpipe Basket Assy does not have any threads it just slides onto the Standpipe. If glue was used then not sure of how you would get it off.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)