Bearing, 304 Ntn-6304-ll (6304)

$28.99

IN STOCK
FREE SHIPPING

Part # 5270-36

By U.S. Seal Manufacturing


Details

Top

Part # 5270-36

Manufacturer Code 6304

Dimensions 2" L x 2" W x 1" D

Alternate Part #'s 10000445, 603628-001, 6304, ALA605003, NA6304LL

Product Description

Motor Ball Bearing

Top

?     Asked on 11/14/2018 by brandon

is the 304 the correct bearing for a century b855
 Reply

A  Answered on 11/15/2018 by InyoPools Product Specialist Hector F.

This motor takes two bearings, The front bearing is part number 5270-36 and the rear bearing is part number 5270-31
 Reply


?     Asked on 12/2/2017 by CHARLIE

is this the front or rear bearing?
 Reply

A  Answered on 12/4/2017 by InyoPools Product Specialist Hector F.

Depending on the specific model or part number on the motor this bearing can be used as a front or rear bearing. 
 Reply


?     Asked on 5/11/2017 by Steve

I have a Pentair VS 3 hp motor # 350105 I've replaced the front bearing before and I believe it's a 6304xxx The rear bearing must be larger due the shaft diameter by the fan. Which one do I need? Thanks
 Reply

A  Answered on 5/12/2017 by InyoPools Product Specialist Lennox H.

Hi, Steve. Unfortunately, we do not have the bearing specs for the Penatir 350105 motor.
 Reply


?     Asked on 2/27/2017 by Bill

Need to replace motor bearing closest to pump due to seal failure. US motor Emerson EB843. Is this the correct bearing. Bearing came apart so don't have number but deminsions appear very close.
 Reply

A  Answered on 2/28/2017 by InyoPools Product Specialist Scott W.

The bearings we carry are for A.O. Smith motors not Emerson motors.
 Reply


?     Asked on 2/27/2017 by Bill

Need to replace motor bearing closest to pump due to seal failure. US motor Emerson EB843. Is this the correct bearing. Bearing came apart so don't have number but deminsions appear very close.
 Reply

A  Answered on 2/27/2017 by InyoPools Product Specialist Scott W.

The correct bearing is part number 5270-31.
 Reply


?     Asked on 12/23/2016 by Kurt

I need to replace the bearing on a B2982 AO Smith (Century) motor. What size bearing do I need?
 Reply

A  Answered on 12/27/2016 by InyoPools Product Specialist Stacey M.

Hello Kurt, the OSE and SE bearing for this B2982 motor is 10000353 which our part number is 5270-31.
 Reply


?     Asked on 10/23/2016 by Brent

I need to replace the bearings on my pool motor. The motor is a GE C1246. Can you tell me which bearings to buy?
 Reply

A  Answered on 10/24/2016 by InyoPools Product Specialist Stacey M.

Hello Brent, the part that is the replacement bearing for this is Bearing, 203 (62032rs) (Single) for $20.99 to replace the usq1152 which matches the motor you gave c1246.
 Reply


?     Asked on 8/14/2016 by Dave

Shaft bearing for Century A.O. Smith B128 56J C-Face 1 HP?
 Reply

A  Answered on 8/20/2016 by InyoPools Product Specialist Lennox H.

Hi Dave, The 304 Bearing is the correct size for the shaft end of the B128 motor.
 Reply


?     Asked on 6/26/2016 by steve hayes

will this replace a 6304 LU?
 Reply

A  Answered on 7/2/2016 by InyoPools Product Specialist Lennox H.

Hi Steve, We do not have any specs on the 6304LU bearing so I can't confirm if there interchangeable. If you can provide us with the motor model or compare the ID and OD measurements.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)