Part # 5055-16
Manufacturer Code C176-59P
Dimensions 12.25" X 10.5"
Alternate Part #'s 351021168, C176-59P, C17659P, STA1018558
Trap/Pump Body Assembly - C176-59P
will this fit a sta rite dura glas 1 pool pump
Clark, in order to confirm that this part is correct we will need the model number and serial number on the unit. Please provide that information. Thank you.
I bought a motor model K48L2PA101A1 from Inyopools a few years ago, now the housing has a leak. Will this work with that model motor? It appears the basket connected is a sta-rite, but I can't find a lot of other information on the equipment.
Hi, I have a pump USQ1202. Is this the matching pump body? Looks like it on the picture.
Have a leak in the body. Is this the replacement for a Model P4E6H-190L, Code 1G036? Also what other part numbers do I need to replace, including those that I should, but don't necessarily need. Thanks Howard
is this part good replacement for 2 horsepower motor
It is not going to depend on the motor, it is going to depend on the model of your pump. That pump body is for a Sta-Rite Dura-Glas 2 so if that is what you have then it will fit.
i need to replace this housing but the one i need is 1 1/2". i bought a new 2" one and put reducers on it but i found out that where the difuser goes in is a different size on the 2" compared to the 1 1/2". what model do i need.
Hi Donald, The Diffuser port inside the housing the same size. You may have to confirm the model of the pump you have to make sure that you ordered the correct part. The Maxi-Glas/ Dura-Glas II pump wasn't available with 1-1/2" ports.
My pump housing is leaking. I can not patch it with epoxy. The plate on the pump reads Model P4EA6E-186L and CODE L026. Is this the correct replacement housing for this pump. I recently replaced the motor and the inside of the pump but now the housing is leaking. IS THIS THE REPLACEMENT PART???
That model P4E does indeed match up with a Sta-rite Dura-Glas II ans/or a Max-E-Glas II If you click on the blue it will take you to their parts page. But, you are correct that part number 5055-16 is indded the body for the model you have.
(5 out of 5 stars) Quality Molded Tank
Reviewed By: Earl T. from Oviedo, Florida ()
Pros: Good quality Design
Then tank I well designed and molded. Since the molding is of a high quality, gaskets fit and seal well. It's well made and designed to endure all kinds of weather.
(4 out of 5 stars) pump housing
Reviewed By: Robert M. from Port Orange FL ()
Pros: good reliable pump
Cons: The manufacturer should use a better material.
This discontinued part was easy to replace, it came with a new basket, clear see through top and O ring and happy INYo had one!