$22.99

Qty:

By U.S. Seal Manufacturing


Details

Top

Part # 5270-05

Manufacturer Code 5VR0303

Dimensions 1-3/4" x 3-3/4"

Alternate Part #'s 17586330, 2444, 2511398-008, 27L1358, 325P306H37M30N4X, 35-125-1130, 38230, 5VR0303, 628318-308, ALD5VR0303, C65R, CAP37030R-NGM, PRC30, RD30370, SPG-101-2717, U18-1388, U181388, USS-601-5156, AEQ5VR0303

Product Description

Capacitor

Product Specifications

Diameter:
1-3/4 in.
Length:
3-3/4 in.
Top

?     Asked on 1/23/2012by Guest

I need to replace my the capacitor on my 1.5HP pool pump. Do you carry the capacitor I need?
 Reply

A  Answered on 1/23/2012 by InyoPools Product Specialist Patrick P.

Please note that capacitors store an electric charge and should be handled with the utmost caution and care. We do not encourage handling a capacitor without any type of safety measures in place and highly recommend contacting a professional service company for repair/replacement. For those that feel comfortable changing the capacitor here's  >How to replace a pool pump capacitor. In order to match up the capacitor you will need more specifications on the capacitor. You will need to match the voltage, the MFD, whether or not the capacitor is a >run or >start type and the actual dimensions of the capacitor body.
 Reply


?     Asked on 5/21/2015by Richard

We have a Hayward Super Pump 2600 Series for our pool (installed in 1998). Need a new run capacitor for it. Not sure which one to get since the label on the one we have is old and hard to read. We know it is 370V. It is 1 3/4" diameter / 2 7/8" length. Can you recommend which capacitor we would need?
 Reply

A  Answered on 5/25/2015 by InyoPools Product Specialist Patrick P.

Hi Richard, unfortunately we do not a 370V capacitor that is 2-7/8" in length. Here is a listing of all the Run Capacitors we carry.
 Reply


?     Asked on 6/8/2015by Skip Fairchild

I purchased a Model B849 Pump Motor from you last May, probably 5/13/14. I installed it on 5/16/14. It now needs a capacitor. Is the covered by a warranty? Whether it is or not I need one asap. The only one I can get locally has the correct specifications but is physically too big to fit in the capacitor cover on the motor.
 Reply

A  Answered on 6/8/2015 by InyoPools Product Specialist Dennis R.

Skip, 5vr0303 is the run capacitor we show for a B849 pump. Not sure why it doesn't fit. And unfortunately we do not sell  370v 30mfd run capacitors smaller than 3 3/8" in length.
 Reply


?     Asked on 9/1/2015by Inyo Visitor

I have a Century B2848 pool pump motor. Will this capacitor fit that motor?
 Reply

A  Answered on 9/4/2015 by InyoPools Product Specialist Lennox H.

Hi, The 30 Mfd 370v Run Capacitor can be used on the Century B2848 motor.
 Reply


?     Asked on 9/27/2015by Inyo Visitor

Hello, I have an A.O. Smith centurion pump motor model B855. It fails to start unless I manually spin the shaft and then it runs fine. Do I need to replace the capacitor mounted on the top of the motor to fix this start up problem?
 Reply

A  Answered on 10/2/2015 by InyoPools Product Specialist Lennox H.

Hi, The B855 motor does not have a start capacitor, the Run Capacitor 30MFD 370V (5VR0303) would be the correct capacitor.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers

My Capacitor was burned out and I could not find one in Las Vegas. The size was an unpopular size and I could only get it on Inyopools.com.

Written on 1/18/2024 by Guest

I watch a video on YouTube and they showed me exactly how to install it.
Took 2 screws off the housing cover, then with a pair of needle nose pliers pulled the wires off.
Next I connected the wires to the capacitor then I placed the cover on with the screws.
Very easy thanks to the YouTube video.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Nut Drivers

Pool pump wouldn't turn on and was humming

Written on 8/15/2023 by Guest

1. Turned off pool breaker
2. Made sure pump was off
3. Removed cover
4. Removed run capacitor
5. Put cover back on
6. Turned on pool breakers
7. Turned on pool pums
8. Pool pumps started working

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Insulation, voltage meter.

1     0

My Dog ripped the old capacitor off the motor

Written on 4/26/2021 by Guest

Since the old capacitor was gone, I just had to plug the new one in, and replace the cover. Remember though, you always need to make sure the capacitor is insulated against the metal frame. I used foam pipe insulation to place the capacitor in and braided foam insulation on the frame itself. The braided insulation has adhesive backing so it sticks to the metal, and also helps seal the capacitor cover from moisture. Also, always discharge an existing capacitor before handling. If you aren't experienced with electrical wiring, I'd suggest hiring a licensed electrician. I have the benefit of growing up with a grandpa that was a master electrician :). I picked moderate skill level because it does take some degree of electrical know how. Thanks for reading!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

2     0

Motor would not start

Written on 9/27/2020 by Guest

This was a simple fix since the capacitor was on top of the motor. I called them and they told me what part I needed and how to do it.
INYO also has excellent videos on DIY repairs.
Thanky guys!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Nut Drivers

0     1

Pump would not start and would trip breaker.

Written on 7/19/2017 by Guest

First turn off breaker.
Unscrew cover were capacitor sits.
Unplug the 2 wires.
Plug in new one and do steps in reverse.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.63  out of 5 stars)
16 Rating
5 star:
 
(12)
4 star:
 
(2)
3 star:
 
(2)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews