Center Core, 150, 200' Predator - 59053800

$167.99

IN STOCK
FREE SHIPPING

Part # 4652-05C

By Pentair Pool Products

  4.8 Average  

Details

Top

Part # 4652-05C

Manufacturer Code 59053800

Dimensions 36" L x 9" W x 9" D

Alternate Part #'s 59053800

Product Description

CENTER CORE, 150,200' PREDATOR (59053800)

Top

?     Asked on 7/3/2019 by Anthony

I assume when putting filter on center core you just pull up slide it off then slide new filter back down on the center core?
 Reply

A  Answered on 7/13/2019 by Industry Professional

yes
 Reply


A  Answered on 7/12/2019 by Industry Professional

That is correct.
 Reply


A  Answered on 7/12/2019 by Industry Professional

yes that is correct
 Reply


?     Asked on 10/8/2017 by Jane

I am looking for my model number to replace the center core. The barcode sticker on the top of the unit has disintegrated. I see that there are two core sizes, is there any other place that would designate the model number ?
 Reply

A  Answered on 10/9/2017 by InyoPools Product Specialist Lennox H.

Hi, Jane. You can use the actual cartridge size or p/n to locate the replacement center core. 
 Reply


?     Asked on 5/29/2017 by walter

Bottom portion of center core is stuck in the filter housing. What is the easiest method to remove so the core can be replaced
 Reply

A  Answered on 6/4/2017 by InyoPools Product Specialist Lennox H.

Hi, Walter. The center core simply slides out of the filter base. The base has grooves that the center core slides into, you may have to wiggle it a little to free the core.
 Reply


?     Asked on 1/10/2017 by Lorna

How do I remove the existing core to replace it? If the existing one does not fit together properly because the connector is broken, does it need replacing?
 Reply

A  Answered on 1/10/2017 by InyoPools Product Specialist Adam Y.

Good afternoon Lorna, It is as simple as twisting and pulling. You would just turn to the left and pull up.
 Reply


?     Asked on 9/10/2016 by terry

i have the Pentair model ECDE90 is this the right center core, the only other number I can find is P/N196041 revA
 Reply

A  Answered on 9/23/2016 by InyoPools Product Specialist Lennox H.

Hi Terry. This is the correct Center Core for the pre-2014 ECDE90 filter.
 Reply


?     Asked on 7/28/2016 by john samartine

IN REPLACING THE CENTER CORE I AM HAVING A VERY HARD TIME TAKING THE BOTTOM PIECE OUT OF THE CANASTER. DOES THAT PART HAVE TO BE REPLACED?
 Reply

A  Answered on 7/31/2016 by InyoPools Product Specialist Lennox H.

Hi John, You may have to wiggle the center core free from the tank body. The lower part of the can be kept in place but replace the middle and upper portion of the core.
 Reply


?     Asked on 6/4/2016 by Danny

I have ordered a predator/ c.c. 150 cartridge with a 6 inch center. Is this core compatable. Will a cartridge with a 6 in. openning fit over it.
 Reply

A  Answered on 6/5/2016 by InyoPools Product Specialist Patrick P.

Hi Danny, yes this is the correct center core for your predator / clean and clear 150 cartridge filter.
 Reply


?     Asked on 4/1/2016 by tom

what does the predator center core do? someone stole mine! can i run with just a cartridge filter?
 Reply

A  Answered on 4/1/2016 by InyoPools Product Specialist Lennox H.

Hi Tom, The Core is the support system of the filter, it is also what the water flow through. The filter will not work as it should without it.
 Reply


?     Asked on 3/1/2016 by Leo Wells

would the above center core replace an American Products 56408300 and 59054300?
 Reply

A  Answered on 3/2/2016 by InyoPools Product Specialist Lennox H.

Hi Leo, This would be the correct Center Core for the 59054300 filter.
 Reply


?     Asked on 11/10/2015 by Darrell

Can I just order the bottom piece of the center core for the 200?
 Reply

A  Answered on 11/10/2015 by InyoPools Product Specialist Charlie R.

Darrell,No, unfortunately the center core is sold as one whole piece.
 Reply


?     Asked on 8/12/2015 by Filter Core Grief

The filter core broke near the bottom of the core in the filter tank. How do I replace the filter core? The picture you have of the core shows a round piece near the bottom of the core. My core broke above the round piece. Does the round piece come out of the tank? If so, how do I get it out? My filter system is a Predator 150 sf. It was installed in 1997 and the core was replaced under warranty in 2000. Can you tell me the part # I need to order the core? Thank you!!
 Reply

A  Answered on 8/14/2015 by InyoPools Product Specialist Lennox H.

Hi, According to the Pentair Clean and Clear Owners Manual the core by placing hands in lifting handles of the core and pull straight up. The Center Core, 150, 200 (59053800) will be the correct replacement for your unit.
 Reply


Top

Review Summary

 (Average 4.8  out of 5 stars)
5 Rating
5 star:
 
(4)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews