Clamp Set, Complete - 12L-CLP

Part # 4770-14

By Praher

  5 Average  

Details

Top

Part # 4770-14

Manufacturer Code 12L-CLP

Dimensions 8.75" X 1"

Alternate Part #'s 12L-CLP, 12LCLP, 20611

Product Description

Clamp Set, Complete - 12L-CLP

OD 9" OD WHERE THE SCREWS ARE 10"

Top

?     Asked on 1/31/2019 by Eugene McShine

I have a Ranger RS16, I need the clamp, but your part number (4770-14) does not match the part # I have in the users manual (2061-1). Is it a different system or will your clamp work?

 Reply

A  Answered on 1/31/2019 by InyoPools Product Specialist Steve M.

Eugene, yes our part number (12l-clp) is the correct part to replace the clamp on the RS16 filter, which is a direct replacement and match for the 2061-1 part number from the manual.  
 Reply


?     Asked on 10/27/2017 by

what all comes with the v clamp set so I will know I'm getting all parts
 Reply

A  Answered on 10/27/2017 by InyoPools Product Specialist Lennox H.

Hi. You will receive the Clamp Halves (2), Hardware Set (2) and an O-ring (1). 
 Reply


?     Asked on 7/31/2017 by Felix Gonzales Jr

I am in need of a filter clamp for an Intex sand filter model SF80110, do you happen to have one???? Need one now!
 Reply

A  Answered on 7/31/2017 by InyoPools Product Specialist Lennox H.

Hi, Felix. this clamp assembly will not fit the Intex SF80110 model filter. You will need to locate a dealer of Intex parts for p/n 11380. 
 Reply


?     Asked on 7/5/2017 by Bret Hancock

I recently installed valve TM-22-L on a Tagelus TA-100D sand filter. This L valve has same diameter but a thicker base than my original valve and my clamp does not fit. I understand that this clamp works with a TM-22-L valve, but will it fit properly with the top of the TA-100D?
 Reply

A  Answered on 7/8/2017 by InyoPools Product Specialist Lennox H.

Hi, Bret. The TM-22-L will not fit the TA-100D Filter, you'll need the TM-22-PB or 261185
 Reply


?     Asked on 6/22/2017 by John

An o-ring is showed in the picture, is it included?
 Reply

A  Answered on 6/22/2017 by InyoPools Product Specialist Hector F.

Yes, the o-ring is included with this clamp assembly.
 Reply


?     Asked on 6/19/2017 by melvin thornhill

will this clamp fit cooper ranger series sand filters model no RS-2115 part # 2006-1
 Reply

A  Answered on 6/20/2017 by InyoPools Product Specialist Patrick P.

Hi Melvin, yes this clamp does fit the Cooper Ranger series sand filters model no RS-2115 part # 2006-1
 Reply


?     Asked on 5/23/2017 by Mattias

Will this fit Columbia Multiport velv TM-12?
 Reply

A  Answered on 5/25/2017 by InyoPools Product Specialist Lennox H.

Hi, Mattias. I don't have enough info on the Columbia system to confirm if this clamp will work. If you can get us dimensions we can confirm if this clamp will fit.
 Reply


?     Asked on 4/29/2017 by Bob

Will this clamp fit a Praher model TM 22 valve on a w.Cooper sand filter?
 Reply

A  Answered on 4/29/2017 by InyoPools Product Specialist Lennox H.

Hi, Bob. Yes, this clamp set will fit the W.Cooper Sand Filter with a TM-22-L valve.
 Reply


?     Asked on 6/21/2016 by Dave

I have a intex pool filter model SF60110 and need a clamp for the top of the tank. Do you have them?
 Reply

A  Answered on 6/22/2016 by InyoPools Product Specialist Lennox H.

Hi Dave, We do not carry any parts for the Intex SF60110 unit.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
5 Rating
5 star:
 
(5)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews