Part # 4040-24
Manufacturer Code SP1084P1
Dimensions 9" x 8-1/2"
Alternate Part #'s 25526-100-000, 34091, 4040-24, 51-150-1659, HAY251587, HAYSP1084P1, SP-1084-P1, SP1084P1, SPX1084P1, HPPSP1084P1
COLLAR, EXTENSION
will this collar work with a hayward 1075 lid that is 8.75" dia
Reply
Hello Tom- No, that is not the correct collar. The correct collar for your 1075 skimmer is the Adjusting Collar (spx1075b).
Reply
Just got this new skimmer . And had to put it down lower than old one .91001 I think is the skimmer number. And now it rained it's over flowing bad .I see that they have existed ring but I don't know how it works .skimmer hole 5 3/4 at top opening....so hope you can help.... Need to extend the top so what will work ?
Don't know what to do...as u see there wasn't much room under the pool deck
Please let me know ty
Skimmer was got on poolsupplies.com
Item 284102
Stranded
Ty Char
The skimmer opening should be high enough that half of it is above water line to work correctly. Since you are in this predicament I would try adding the collar and seal it with underwater magic. Make sure that when applying the underwater magic, you get water mixed into it needs to have water to activate it and harden. No problem if you are applying it below water line. 88-867-1021
Reply
THIS RING IS MADE FOR INGROUND POOLS.
Reply
The skimmer opening should be high enough that half of it is above water line to work correctly. Since you are in this predicament I would try adding the collar and seal it with underwater magic. Make sure that when applying the underwater magic, you get water mixed into it needs to have water to activate it and harden. No problem if you are applying it below water line. 88-867-1021
Reply
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Product was exactly as described,and it came in days so we could pour concrete without delay!
Was this review helpful to you?