3-Prong Pump Power Cord, 6', 14 GA, 115V - SPX1250WA

$21.99

IN STOCK

Part # 3118-0

By PureLine

  4.8 Average  

Details

Top

Part # 3118-0

Manufacturer Code SPX1250WA

Dimensions 36" L x 1.04" W x 1.02" D

Alternate Part #'s PL3547

Product Description

Power Cord for 115 volt Pool Pump: 3-Prong, 6-ft in Length, 14 GA.

Note: Watertight Grommet Not Included.

Product Specifications

Cord Length:
6 ft.
Plug:
Standard
Top

?     Asked on 5/7/2019 by David

I need a power cord outdoor rated at 105c for pool heater. Is this rated 105c?
 Reply

A  Answered on 5/9/2019 by Industry Professional

unfortunately there is no rating provided for the cord. We would have several questions as to the actual application as a power cord is more rated on voltage and amperage than ambient air temp.
 Reply


?     Asked on 4/26/2019 by Ed

I have an old Hayward Super Pump SP-1610-Z1-M (model c48L2n134b1) that I was thinking of using to vac out sand and dirt I don’t want to run through the system. Will this cord work and is that a good idea to use that pump?
 Reply

A  Answered on 4/28/2019 by InyoPools Product Specialist Patrick P.

Hi Ed, Yes this cord will work on a Super Pump if you are wiring it 115V. From a safety standpoint, you want to be very careful when using a pump near the pool so the pump doesn't fall in. The suction of the pipe going into the water can be very strong so if there is a swimmer in the pool they could become entrapped easily.
 Reply


?     Asked on 4/25/2019 by JR

Hi, I just purchased a Pentair Dynamo pump model: DYNIIN1 - 1 1/2; Motor S48AB86A03 ; 115v 60hz; MaxAmps 12.0. Will this cord work? My cord is too short to reach the electrical outlet, the motor comes with a 3 foot cord and I'm needing a longer cord do you have one longer than 6ft just to be safe?
 Reply

A  Answered on 4/28/2019 by InyoPools Product Specialist Patrick P.

Hi JR, This is the longest we have, it does look like you have it on order, thank you very much.
 Reply


?     Asked on 4/7/2019 by Crystal

Will this cord work for a Hayward ultra pro lx pump? Model # on the pump is SP2295
 Reply

A  Answered on 4/7/2019 by InyoPools Product Specialist Lennox H.

Hi, Crystal. Yes, it will. 
 Reply


?     Asked on 11/10/2018 by james browning

will this cord work on a 1.5 harris pool pump...?
 Reply

A  Answered on 11/10/2018 by InyoPools Product Specialist Patrick P.

Hi James, yes it will.
 Reply


?     Asked on 10/23/2018 by David Salanon

Do you know where I can get the grommet online that is compatible with a Hayward Super Pump? Do you have any part numbers available? Thanks Thank you.
 Reply

A  Answered on 10/24/2018 by InyoPools Product Specialist Lennox H.

Hi, David. You will need a 1/2-14 NPT watertight grommet. You can use that description to initiate a Google search. 
 Reply


?     Asked on 9/24/2018 by Tom

Can I use this power cord on my model# SP1515-Z-1-ESC A.O Smith pump. 1.5 HP, 115Volts, 15 Amps
 Reply

A  Answered on 9/24/2018 by InyoPools Product Specialist Lennox H.

Hi, Tom. Yes, this power cord can be used to operate model# SP1515-Z-1-ESC. 
 Reply


?     Asked on 9/17/2018 by Steve

Can I use this cord to replace the one on my Hayward power Flo LX pump model number sp1580x15. 1 1/2 hp 115 volts 12 amps
 Reply

A  Answered on 9/19/2018 by InyoPools Product Specialist Hector F.

Yes, you can use this cord for your model pump. 
 Reply


?     Asked on 8/24/2018 by Gerry

I have a Hayward SP2607X10 who's paperwork says in the electrical section a 1hp pump should run on 12awg wires. I see you advised earlier to a question that this would work for the SP2607, and it is described as 14 GA cord. Could you clarify please? I'd love to use this cord especially would the clip connection but am concerned about the wire gauge.
 Reply

A  Answered on 8/24/2018 by InyoPools Product Specialist Lennox H.

Hi, Gerry. Yes, the manual states to use No.12 wires for 115 volts and No.14 wires for 230 volts. However, you can still use this No.14 pump cord. You can purchase the No.12 wire and the quick disconnect making your own power cord. 
 Reply


?     Asked on 8/23/2018 by

can i plug the pump directly into this plug and then into the outlet
 Reply

A  Answered on 8/23/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, if the pump is able to be wired for 115V you can use this power cord which will be able to plug into an outlet. 
 Reply


?     Asked on 8/8/2018 by Mike

Is this cord compatible with Hayward Super Pump SP1610Z1M, model #C48L2N134B1?
 Reply

A  Answered on 8/8/2018 by InyoPools Product Specialist Lennox H.

Hi, Mike. Yes, operating that motor at 115 volts, this Pump Power Cord can be used. 
 Reply


?     Asked on 8/1/2018 by Jacob

Can I use this to replace the conduit/cord for my ust1102?
 Reply

A  Answered on 8/1/2018 by InyoPools Product Specialist Lennox H.

Hi, Jacob. Yes, it can if it meets your installation requirement. 
 Reply


?     Asked on 7/26/2018 by John

I need a replacement motor for a Century Centurion motor 8-168098-212 1 hp 230/115
 Reply

A  Answered on 7/26/2018 by InyoPools Product Specialist Lennox H.

Hi, John. The Century B128 will be the replacement motor for Part # 8-168098-21. 
 Reply


?     Asked on 7/11/2018 by Katie

Will this cord work for a century pump MOD # BN25V1?
 Reply

A  Answered on 7/11/2018 by InyoPools Product Specialist Lennox H.

Hi, Katie. Yes, this Pump Power Cord - SPX1250WA will work with the BN25V1 motor. 
 Reply


?     Asked on 7/5/2018 by Ronald

Will this power cord work with the Doheny's in-ground pool Pro Pump, 1.5HP, 115/230 volts, 14.2/7.1 Amps?
 Reply

A  Answered on 7/8/2018 by InyoPools Product Specialist Lennox H.

Hi, Ronald. Yes, it will operating at 115 volt.
 Reply


?     Asked on 7/4/2018 by Stevc

I have a Hayward Power FLO LX pump. One of the prongs on the plug (amazingly) snapped off. So I was going to replace the power cord. Can I use SPX1250WA? My current cord has the twist lock style plug and it's imprinted as 12 GA/3 wire, where this one is 14 GA and has the standard three prong grounded plug. Thanks!
 Reply

A  Answered on 7/8/2018 by InyoPools Product Specialist Lennox H.

Hi, Stevc. You will need Part # SPX1550WA1 - 3-Prong 3' Pump Power Cord w/ Twist Lock. If you replace it with this standard cord, you will have to change the outlet. 
 Reply


?     Asked on 6/6/2018 by Matt C

Hello, Can this plug be used on a Heyward 1 1/2 Super Pump, SP1610Z1M?
 Reply

A  Answered on 6/6/2018 by InyoPools Product Specialist Hector F.

Yes, this cord can be used to wire a 110/120 volt Super Pump. 
 Reply


?     Asked on 6/1/2018 by Angela Brasher

I ordered this cord but it didn’t come with the screw part that covers the hole or the wiring. Do I have to order it separate? It shows it in the picture so I thought it came with it
 Reply

A  Answered on 6/2/2018 by InyoPools Product Specialist Lennox H.

Hi, Angela. The Grommet is not included with the stock we currently have. You can purchase one at your local hardware store or reuse the one your have. 
 Reply


?     Asked on 6/1/2018 by

CAN THIS CORD BE USED ON A WATERWAY PUMP MODEL#S55CXRJC-8049?
 Reply

A  Answered on 6/5/2018 by InyoPools Product Specialist Patrick P.

Yes this cord can be used on a WATERWAY PUMP MODEL#S55CXRJC-8049 as long as you wiring 115V
 Reply


?     Asked on 5/30/2018 by Larry R Parks

Will this work on c48k2n143b1 current plug wires are blue, brown and the ground.
 Reply

A  Answered on 5/30/2018 by InyoPools Product Specialist Lennox H.

Hi, Larry. Yes, it can if operating at 115 volts. The Black is your Line, White is your Neutral and Green your Ground. 
 Reply


?     Asked on 5/27/2018 by Angela

Will this plug work for model sp2315x20
 Reply

A  Answered on 5/28/2018 by InyoPools Product Specialist Lennox H.

Hi, Angela. Yes, this Power Cord can be used to wire the SP2315X20 pump for 115 volts. 
 Reply


?     Asked on 5/26/2018 by Tom Sayles

I just purchased a new 3/4 HP Super Pump from you guys. I will need to move the power cord from the old pump to the new one. The cord is in good shape but the washer that sits on the plastic end that screws into the pump is damaged and needs to be replaced. What do you recommend I use for this? My cord looks like the 3 Prong Pump Power Cord you have listed on your site.
 Reply

A  Answered on 5/26/2018 by InyoPools Product Specialist Lennox H.

Hi, Tom. You do not want to use your existing power cord if it's damaged in any way. I would recommend replacing it, this Power Cord - SPX1250WA will work with 115 volts. You can use our How To Wire A Pool Pump guide for instructions. 
 Reply


?     Asked on 4/29/2018 by Bill

Will this work onSP1515Z pump
 Reply

A  Answered on 4/29/2018 by InyoPools Product Specialist Lennox H.

Hi, Bill. Yes, this Pump Power Cord - SPX1250WA will work with the SP1515Z motor.
 Reply


?     Asked on 4/28/2018 by karen

Is it available in a 6 foot length? This one is described as 6' in one place and 3' in another.
 Reply

A  Answered on 4/30/2018 by InyoPools Product Specialist Megan C.

The PART # 3118-0 is the six-foot cord, not the 3'.
 Reply


?     Asked on 4/28/2018 by Karen

Will this 6' cord work on a Pentair motor?
 Reply

A  Answered on 4/29/2018 by InyoPools Product Specialist Lennox H.

Hi, Karen. Yes, it can. 
 Reply


?     Asked on 4/28/2018 by

Will this cord work with a Hayward SP1607Z1m?
 Reply

A  Answered on 4/28/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, this power cord can be used to power the SP1607Z1M motor at 115v.
 Reply


?     Asked on 4/17/2018 by Scott

Do you sell a power cord for a Hayward sp1610z1m
 Reply

A  Answered on 4/17/2018 by InyoPools Product Specialist Lennox H.

Hi, Scott. This power cord can be used if it's being wired for 115 volts and within 3 ft from the power source. 
 Reply


?     Asked on 8/20/2017 by Sarah

Will this cord work with a Hayward SP2607X10 Super Pump 1-HP Max-Rated Single-Speed Pool Pump? If not, please recommend one.
 Reply

A  Answered on 8/22/2017 by InyoPools Product Specialist Lennox H.

Hi, Sarah. Yes, this Pump Power Cord will work with the Hayward SP2607X10 pump operating at 115 volts. 
 Reply


?     Asked on 8/19/2017 by

Will this cord for a Pentair Dynamo 340210?
 Reply

A  Answered on 8/19/2017 by InyoPools Product Specialist Alex V.

Thomas, Yes, the cord can be use on any 115v application. 
 Reply


?     Asked on 7/9/2017 by

Can I use this on a 115V, 60 HZ, 9 AMP, 1.5 HP White River brand pool and spa pump? It appears to be the same.
 Reply

A  Answered on 7/10/2017 by InyoPools Product Specialist Lennox H.

Hi. Yes, you can use this Power Cord with the White River pump you have.
 Reply


?     Asked on 6/27/2017 by

i NEED TO KNOW HOW TO HOOK A POWER CORD BACK TO THE PUMP
 Reply

A  Answered on 6/27/2017 by InyoPools Product Specialist Stacey M.

Hello, f you are wiring for 115V, the three wires to the pool pump will be black, white and green. Attach the white wire to terminal 1 of Line 1 (L1). Attach the black wire to terminal 3 of Line 2 (L2). Attach the green wire under the Ground screw (GND). The black plug is shifted in position so the the black wire is attached to terminal 4 Line 2 (L2) and the white wire is attached to terminal 5. Note: in this position the white arrow on top of the 2 prong black plug is pointing at the 115V label. This found underwiring here.
 Reply


?     Asked on 6/25/2017 by Richard

Is this the correct cord for an AO Smith UST 1102 pump motor. If not could you recommend the correct onw. Thanks.
 Reply

A  Answered on 6/26/2017 by InyoPools Product Specialist Lennox H.

Richard, This power cord can be used to power a UST1102 motor at 115 volts.
 Reply


?     Asked on 6/16/2017 by Betty Brown

Will the cord (part #3118-0) work on Power-Flo matrix Pump Series. SP1510Z-XE8C (our cord needs replaced)
 Reply

A  Answered on 6/16/2017 by InyoPools Product Specialist Lennox H.

Hi, Betty. Yes, this cord will work with the SP1510ZXE motor on the Power-Flo Matrix Pump.
 Reply


?     Asked on 6/15/2017 by Al

Is this cord ok for sp1515Z1BC? Volts 115 amps 12?
 Reply

A  Answered on 7/22/2017 by InyoPools Product Specialist Alex V.

Al, Yes, this cord would be fine. 
 Reply


?     Asked on 6/9/2017 by VICTOR DOAN

Can i use with hayward superpump SP2607X10
 Reply

A  Answered on 6/10/2017 by InyoPools Product Specialist Lennox H.

Hi, Victor. I would not recommend using this cord with the SP2607X10 pump.
 Reply


?     Asked on 5/27/2017 by

Can you use this cord on a Hayward 1.5 hp pump SP1610Z1M
 Reply

A  Answered on 5/27/2017 by InyoPools Product Specialist Patrick P.

Hi, we would not suggest this cord for a SP1610Z1M motor as that motor has a full load amps on 115V of 19.6 amps and this cord is only rated to 15 amps.
 Reply


?     Asked on 5/13/2017 by Jeremy

Does this cord go with the sp1580z2
 Reply

A  Answered on 5/14/2017 by InyoPools Product Specialist Lennox H.

Hi, Jeremy. Yes. this 3-prong power cord can be used with the SP1580Z2 pump motor.
 Reply


?     Asked on 4/25/2017 by CV

Hi..does this cord works for pump Ultra-Pro LX SERIES SP-2295?
 Reply

A  Answered on 4/26/2017 by InyoPools Product Specialist Lennox H.

Hi, CV. Based on the info provided by the manufacturer this cord is not compatible wit that model pump. You will need to locate p/n SPX1550WA6C.
 Reply


?     Asked on 3/1/2017 by Steve Callas

Is this cord compable for a sp5500z2 (c) ?
 Reply

A  Answered on 3/2/2017 by InyoPools Product Specialist Megan C.

Hello, Steve. Yes, the 3-Prong Pump Power Cord, 3', 14 GA, 115V (SPX1250WA) is the correct cord used with the Matrix Pool Pumps. We also offer the 3-Prong Pump Power Cord w/ Twist Lock, (SPX1550WA1) if needed.
 Reply


?     Asked on 10/22/2016 by kevin

Do you have this cord for 230v ?
 Reply

A  Answered on 10/24/2016 by InyoPools Product Specialist Lennox H.

Hi, Kevin. Unfortunately, we do not have a Pump Power cord that is 230 volts. However, you can pick one up at your local hardware or electical store.
 Reply


?     Asked on 8/20/2016 by joel

is this a 15 amp or 20 amp plug?
 Reply

A  Answered on 9/1/2016 by InyoPools Product Specialist Lennox H.

Hi Joel, This cord is rated at 15 amps.
 Reply


?     Asked on 7/2/2016 by Amanda

Is this cord compatible with a hayward s180t? I cant find a different hayward replacement cord .
 Reply

A  Answered on 7/3/2016 by InyoPools Product Specialist Alex V.

Amanda, The S180T sand filter does not have a cord. Do you have the pump model?
 Reply


?     Asked on 6/12/2016 by Nelson

is this compatible with SP1510
 Reply

A  Answered on 6/12/2016 by InyoPools Product Specialist Matt S.

Yes, this power cord is compatible with the Hayward SP1510.
 Reply


?     Asked on 8/5/2015 by Eric

Can I use this cord for a max-flo xl hayward inground pool pump
 Reply

A  Answered on 8/6/2015 by InyoPools Product Specialist Joe S.

Hello Eric, yes this cord can be used if you are using a 115v plug
 Reply


?     Asked on 7/13/2015 by Adam

Hi- I'm looking for a replacement cord for a Hayward Super Pump SP2600 series (inground pool). Is this the right cord? Thanks!
 Reply

A  Answered on 7/14/2015 by InyoPools Product Specialist Hector F.

This cord would be compatible for your pump if you are using it at 110/120 voltage and is set up to code per your county.
 Reply


?     Asked on 7/8/2015 by Jeff

Does this power cord work with the Hayward Power FLO Matrix Pump SP1593 ?
 Reply

A  Answered on 7/9/2015 by InyoPools Product Specialist Matt S.

Hello Jeff, this standard plug would be compatible with the Hayward Matrix Pump SP1593
 Reply


Top

Review Summary

 (Average 4.8  out of 5 stars)
5 Rating
5 star:
 
(4)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews