Part # 6652-40
Manufacturer Code 7056
Dimensions 4" L x 4" W x 2" D
Alternate Part #'s 25830-704-800, 7056, 27-295-1126, JDY-561-2322, JDY7056, JND7056
This 7056 Cover with flapper for the Jandy check valve. This is used on the Jandy 7235. 7305, 7511, and 7512 check valves with 1.5" to 2.5" ports. That includes the straight-through and 90° check valves.
Includes
I'm needing a Jandy P/N 7236 Check Valve 2" piping . I have a spa/pool comb. Water is draining from spa to pool when turned off when turned back on from pool to spa is this what I NEED or a divertor valve or actuator valve. Confused PLEASE HELP !!!
Reply
Hi J.W., If you already have the Jandy Check Valve (7305) installed and need to replace the flapper assembly then p/n 7056 is the correct part you will need. You will need a check valve along with a diverter valve. A check valve stops the water from draining out of the spa and a diverter valve will direct the water flow between the pool and spa.
Reply
I am looking for a replacement Jandy Check Valve. The part number is 7236 REV. I can not seem to find this part on your website. Any assistance would be appreciated. Thanks.
Reply
Hi, Gregory. The Cover With Flapper Assy & O-ring (7056) is the correct part for your valve with p/n 7236 stamped on it.
Reply
My Check Valve does not have any part numbers on it but it does have 8 screws on it. Onto top it has an arrow indicating flow to spa. I would like know which would be the right check valve. Thanks
Reply
Hi, Antonio. Unfortunately, with a valve model or part number, I will not be able to tell you which parts you'll need.
Reply
The Most Helpful Review
1 1
(5 out of 5 stars) does the job..Fast service
Reviewed By: hvtxx from texas ()
Pros: does the job
Cons: non
Your stupid star rating on this survey is confusing and easy to skip and hard to figure out what I was doning wrong.
Was this review helpful to you?
The Most Recent Reviews
1 0
(2 out of 5 stars) Leaky o ring.
Reviewed By: Inyo Customer ()
It hasn’t been in one season yet and is already leaking and allowing the spa to drain into the pool. Which is why I replaced it initially.
Was this review helpful to you?
(5 out of 5 stars) Great check valve
Reviewed By: James E. from Ft. Myers, FL. ()
Pros: Great product
Was this review helpful to you?
1 0
(4 out of 5 stars) EXCELLENT PRODUCT
Reviewed By: Vita D. from East Stroudsburg, PA ()
Pros: WORKS WELL
Cons: DOESN'T LAST PAST ONE SEASON BECAUSE OF HIGH CHLORINE CONTENT
GREAT PRODUCT - COSTS ALMOST AS MUCH AS THE WHOLE VALVE - THE ORIGINAL VALVE ONLY LASTED ONE SEASON - LET'S SEE WHAT HAPPENS WITH THIS ONE.
Was this review helpful to you?
1 0
(5 out of 5 stars) Check valvle replacement
Reviewed By: Adrian from Cleveland, GA ()
Pros: Easy installation
Cons: None at this time
The replacement was installed with no issues. Took about 5 minutes to remove the old valve and replace with the new. It has only been two days, but no issues or leaks. Works beautifully!
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Dana D. from Humble, TX ()
Pros: convenience, accuracy, additional information, etc
Cons: none
Excellent representations and info on internet catalogue. Very descriptive
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: David from Houston, TX ()
Good replacement product for Pentair check valve. This was the correct part required to replace.
Was this review helpful to you?
1 0
(3 out of 5 stars) Good check valve replacement
Reviewed By: lenny from la quinta, ca ()
Pros: necessary for the check valve
Cons: doesn't seem to correct the problem
the product itself is good and easy to install. the product does not last as long as most jandy replaccement products
Was this review helpful to you?