Cover, Strainer, Clear Lexan With O-ring (spx1500d2a)

By Hayward Pool Products
  4.92 Average  

Details

Top

Part # 5111-17A

Manufacturer Code SPX1500D2A

Dimensions 6.45" X 2.8"

Alternate Part #'s 351501200, HAY1011997, SP1500D2A, SPX1500D2A

Product Description

COVER, STRAINER, CLEAR LEXAN WITH O-RING (SPX1500D2A)

This pump strainer lid, made from highly durable Lexan polycarbonate, is used on various Hayward pool pumps including the Power-Flo LX, Power-Flo 1500 Series, Power-Flo II & III, and Turbo-Flo.  This is the OEM Hayward part.

Top

?     Asked on 5/29/2016 by Paul

I have a Hayward Ultra Pro LX pump. I use vaseline to lubricate the strainer cover O-ring, and the under surface of the cover in contact with strainer housing. When I need to remove the cover to clean the strainer basket, it is extremely difficult to rotete the cover to the open position. What I do make the cover open and close operation less difficult Lubricant? Thanks

A     Answered on 5/30/2016 by Alex V.

Paul, Do not use vaseline. Vaseline is petroleum based and will deteriorate the o-ring. You will need to clean the lid and replace the o-ring. You will need a water based or non-petroleum based lubricant.

?     Asked on 5/9/2016 by Jamie Marvel

What lid will fit a hayward pump EP1550LX? The lid we currently have is nearly impossible to get on and off, it may be a generic lid.

A     Answered on 5/12/2016 by Alan M.

Hello Jamie, The Cover, Strainer, Clear Lexan With O-ring (spx1500d2a) will fit the Hayward Power-Flo LX EP1550LX model pump. I would also recommend replacing the Cover O-ring (spx1500p) along with the lid.

?     Asked on 5/3/2016 by

hello, will this lid fit a Hayward Ultra Pro LX pump (SP229021HZ) ? If not would you know what lid would ? Thank you.

A     Answered on 5/4/2016 by Charlie R.

Luke,Yes, this cover will fit the Hayward Ultra-Pro LX Above ground pool pump.

?     Asked on 4/26/2016 by Tonya

I have an Hayward power Flo lx pump sp1580z2(d) I need a lid what kind could I use.

A     Answered on 4/27/2016 by Hector F.

On this parts diagram you have two options at key 9. Please click here.

?     Asked on 2/5/2016 by

The part# on my pump lid is SP 1500 02. I see some on your website that are similar ("SP1500D2A" and "SPX1500D2A"). Are they the same or is mine different?

A     Answered on 2/8/2016 by Lennox H.

Hi, This item and p/n' "SP1500D2A" and "SPX1500D2A" are the same as the pump lid you have. The "02" on the ending of your lid is likely "D2" depending on how you look at it.

?     Asked on 2/5/2016 by

The part# on my pump lid is SP 1500 02. I see some on your website that are similar ("SP1500D2A" and "SPX1500D2A"). Are they the same or is mine different?

A     Answered on 2/8/2016 by Lennox H.

Hi, This item and p/n' "SP1500D2A" and "SPX1500D2A" are the same as the pump lid you have. The "02" on the ending of your lid is likely "D2" depending on how you look at it.

?     Asked on 9/24/2015 by Sherry

I'm trying to find a strainer cover and o ring for a Hayward Northstar 1081 Self Priming Pump, 1 hp SP1610-Z-1 BNSC. Will this fit? It is an older model pump, thanks..

A     Answered on 9/29/2015 by Lennox H.

Hi Sherry, The Clear Lexan Stainer Cover w/O-ring (SPX1500D2A) will not fit onto a Hayward Northstar pump housing.  You can click the >Hayward Northstar Pumps 1998-2007 & 2008-Current< link for the list of replacement parts based on the manufactured year.

?     Asked on 7/20/2015 by Bob Flynn

I just need the oring. Can that be purchased separetly?

A     Answered on 7/20/2015 by Hector F.

Yes these can be purchased seperately. You will need the specific complete pump model to cross reference that o-ring.

?     Asked on 6/15/2015 by Brian

Will this lid work for SP1780?

A     Answered on 6/15/2015 by Patrick P.

Hi Brian, Yes this is the correct lid for the Hayward SP1780 Power Flo II Pump.

?     Asked on 6/15/2015 by

Blew the lid on my Hayward Power Flow LX (SP1580X15). On the lid itself it has the #SP1515A on it. Will this lid work on my pump? If so then I would like to order.

A     Answered on 6/15/2015 by Patrick P.

Yes this would be the correct lid for your Power Flow LX (SP1580X15) and you may order this lid directly through this page.

?     Asked on 6/8/2015 by Lisa

I have the Hayward power flo pump it shows the number sp-1510-z-1-x-e is this the correct lid for this machine?

A     Answered on 6/8/2015 by Dennis R.

Lisa, Part #  5111-17A is correct for most Hayward Power Flo pumps including the 1500 and 1700 series. You need to check if your model is included in these series of Hayward Power Flo pumps to be sure.

?     Asked on 6/6/2015 by

My Model Number is SW15851X20TL will this cover fit my pump?

A     Answered on 6/6/2015 by Matt S.

Hello, yes that is the correct lid for the SP1580 pump in that pump and filter system

?     Asked on 6/1/2015 by dieter strangl

will this part fit the hayward sp-1510-z1-xehc

A     Answered on 6/1/2015 by Lennox H.

Dieter, The P/N SP1510Z1XEHC is for the Hayward Matrix pump. The Strainer Cover w/ Lock Ring & O-ring, Matrix (SPX5500D) will be the correct cover for the Hayward Matrix Pump.

?     Asked on 5/24/2015 by

Will this cover fit the Hayward SP15932S Power-Flo Matrix pump? Thank you.

A     Answered on 5/24/2015 by Patrick P.

No this lid does not fit the Hayward Matrix pump. You would require the Hayward Power-Flo Matrix Lid here.

?     Asked on 5/24/2015 by

i have a powerful LXpump type sp part 7193390-20 will this lid fit my pump.

A     Answered on 5/24/2015 by Hector F.

This lid wiil fit a Powerflo LX pump.

?     Asked on 5/24/2015 by

will this fit a powerflolx model sp1580x15

A     Answered on 5/24/2015 by Hector F.

Yes it will.

?     Asked on 5/18/2015 by Pete

Will this lid fit a Power Flo LX SP1581 unit? Thanks

A     Answered on 5/18/2015 by Patrick P.

Yes it will.

?     Asked on 5/17/2015 by angie

Will this lid fit a sp33152

A     Answered on 5/17/2015 by Lennox H.

Angie, This lid will not fit a Turbo Injection model # SP33152 Pump. The Turbo Injection model # SP33152 uses the same parts as the Hayward Super II Pump.

?     Asked on 5/16/2015 by Scott

My pump number is SP15802SFP. Is this the correct lid for this pump?

A     Answered on 5/17/2015 by Patrick P.

Yes this lid does fit the Hayward SP15802SFP Pump, we also carry a Generic Version of this Lid which we have had good success with and it will save you some money!

?     Asked on 4/30/2015 by glen

I have a strainer cover sp-1500-d2. What o-ring part number do I need to fit this cover? thanks for any input

A     Answered on 4/30/2015 by Brian M.

If you have the clear strainer cover, then the o-ring would be part number 5111-18B .

?     Asked on 3/8/2015 by Audrey waldrup

My pump model # is sp1510-z-2-sxbc Will this fit mine?

A     Answered on 3/9/2015 by Robert M.

Hello Audrey - Part number 5111-17A is the correct lid for your pump.

?     Asked on 2/23/2015 by jeff

My lid has a number SP1515A. Will this lid fit?

A     Answered on 2/23/2015 by Hector F.

That is correct. This lid will fit your pump.

?     Asked on 4/30/2013 by Guest

Will this lid fit the Hayward Pump model # SP1510?

A     Answered on 4/30/2013 by Patrick P.

Yes, lid part # 5111-17A, will fit Hayward Pump model # SP1510.

?     Asked on 4/29/2013 by Guest

Will this lid fit the Hayward SP1580X15FP pump?

A     Answered on 4/29/2013 by Patrick P.

Yes the 5111-17A will fit the SP1580X15FP Power Flo pump.

?     Asked on 4/20/2013 by Guest

Will the SP1500D2A lid fit a Hayward EP1550LX series pump?

A     Answered on 4/20/2013 by Patrick P.

Yes, the SP1500D2A lid will fit the EP1550LX pump.

?     Asked on 4/20/2013 by Guest

Do I need to buy the lid o-ring with the SPX1500D2A lid?

A     Answered on 4/20/2013 by Patrick P.

If you buy the SPX1500D2A lid, the o-ring comes with it. You will not need to buy it separately.

Top

Review Summary

  (Average 4.92 out of 5 stars)
25 Ratings
5 star:
 
(23)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review

1 of 1 person found the following review helpful:

  (5 out of 5 stars)  strainer cover with O-ring

()

Pros: fits perfect.

Cons: none

recreceived in 3 days,and was exactly what I asked for and perfect fit.

Was this review helpful to you?  Yes - No


The Most Recent Reviews

1 of 1 person found the following review helpful:

  (4 out of 5 stars)  good quality

from vermont ()

Pros: good quality, sturdy

Cons: expensive, very tight

this was bought as a replacement for and older lid...the fit is quite snug and although I'm having some problems with leakage, I think perhaps if I fit the o ring better it will be okay. It is, however, extremely tight and so difficult to turn the lid. IN general, I think poorly designed

Was this review helpful to you?  Yes - No


Be the first to say if this was helpful or not

  (5 out of 5 stars)  

()

factory part

Was this review helpful to you?  Yes - No


Be the first to say if this was helpful or not

  (5 out of 5 stars)  

()

Working great

Was this review helpful to you?  Yes - No


Be the first to say if this was helpful or not

  (5 out of 5 stars)  

from west union wv ()

Pros: Sturdy

Was this review helpful to you?  Yes - No


Be the first to say if this was helpful or not

  (5 out of 5 stars)  Perfect fit - no leaks

from Fall River, MA ()

Pros: Excellent product

Cons: None

The product was received on schedule and was a perfect fit.

Was this review helpful to you?  Yes - No


1 of 1 person found the following review helpful:

  (5 out of 5 stars)  Cover an exact match, thanks.

from West Gardiner, ME ()

Cons: none

Order went smoothly. Cover an exact match. Fair price with free shipping, definitely would order again.

Was this review helpful to you?  Yes - No


Be the first to say if this was helpful or not

  (5 out of 5 stars)  

from Williamsburg, VA ()

Pros: fit perfect

Cons: didn't come with gasket lubricant

It is a perfect fit. All i needed to get my pool up and running.

Was this review helpful to you?  Yes - No