Housing Gasket - G-95

$12.99

IN STOCK

Part # 5110-12

By Aladdin

  4.34 Average  

Details

Top

Part # 5110-12

Manufacturer Code G-95

Dimensions 6 1/2" X 0.05"

Alternate Part #'s 35B1108, G95, HAY1012018, SP1600T, SPX1600T

Product Description

Housing Gasket - G-95

Pump housing gasket for the Hayward Max-Flo, Super Pump, and Super Pump VS models.

This part is included in the Max-Flo tune-up kit and Super pump tune-up kit (for standard Super Pump, not VS model).

Top

?     Asked on 5/27/2019 by Joe Savovic

Where does this gasket go?
 Reply

A  Answered on 5/28/2019 by InyoPools Product Specialist Lennox H.

Hi, Joe. This Housing Gasket - G-95  goes into the pump housing. You can use the Hayward Super Pump VS Parts Diagram as a reference. 
 Reply


?     Asked on 6/18/2018 by

my Hayward is SP2607X10F, Serial# 610G21, does it fit? Thanks
 Reply

A  Answered on 6/18/2018 by InyoPools Product Specialist Patrick P.

Yes this will fit your SP2607X10F, Serial# 610G21
 Reply


?     Asked on 5/23/2018 by Tom

Is this the only gasket I need if replacing my motor on Hayward Super Pump ?
 Reply

A  Answered on 5/24/2018 by InyoPools Product Specialist Hector F.

Most commonly we recommend getting the complete seal kit which for the Super Pump can be either the GOKIT3 for a chlorine pool or a GOKIT3SALT for a saltwater swimming pool. 
 Reply


?     Asked on 6/25/2017 by Bill

I bought kit #23. It seems like the seal is to big for the seal plate. It does not fit snug at all. I assume it goes on the outside of the seal plate, then goes into the filter. Could it be to big?
 Reply

A  Answered on 6/29/2017 by InyoPools Product Specialist Lennox H.

Bill. Kit # 23 does not include this gasket. The Housing Gasket fits into the grove on housing. Make sure you have the correct parts.
 Reply


?     Asked on 4/9/2017 by Frank Leahy

The gasket fits perfectly, but it sticks out about 1/32 of an inch. Is this normal? most gaskets seat flush against the housing....TY
 Reply

A  Answered on 4/11/2017 by InyoPools Product Specialist Andy O.

Hello Frank- This gasket in particular sticks out just a bit when installed. I know it'll seem unnatural but I can assure you its been that way on every super pump I've worked on.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Wrench Set

Old seal bad

Written on 7/14/2019 by Guest

Once I removed the old motor to replace it. Installed the new seal and put it all back together. Problem solved.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers, Socket Set

0     1

Motor burned up

Written on 11/25/2016 by Guest

I ordered the gasket and motor from into pool and it was very easy to change. I would recommend it to anyone who needs to replace there motor.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.34  out of 5 stars)
9 Rating
5 star:
 
(6)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(1)

The Most Helpful Review


The Most Recent Reviews