Guide Cone (cx900d)

$15.99

IN STOCK

Part # 4663-05

By Hayward Pool Products

  5 Average  

Details

Top

Part # 4663-05

Manufacturer Code CX900D

Dimensions 4" L x 4" W x 2" D

Alternate Part #'s CX900D, HAY0511462

Product Description

GUIDE CONE

Top

?     Asked on 4/29/2017 by Lisa

Help please!! After I cleaned my filter and replacing the top to filter housing I noticed I have water leaking out from the sides. I replaced the filter and large rubber gasket so thinking the inside part of the lid. Confused can someone help me please. Thank you
 Reply

A  Answered on 4/30/2017 by InyoPools Product Specialist Stacey M.

Hello, sometimes there is water that leaks out because either the oring didn't sit right into the housing of the filter, or possibly didn't have enough lube to seal properly, if you are still having problems please send pictures to upload@inyopools.com so our techs can take a look at this for you.
 Reply


?     Asked on 12/29/2016 by Joe B.

I have a Stayclear plus (C12002) filter housing. Just lately it is very difficult to remove the top half to access the filter element. Is the cone somehow attached to the cap retaining lug to aid in the removal process? My cone is just sitting atop the filter element doing what? Thank-You.
 Reply

A  Answered on 12/29/2016 by InyoPools Product Specialist Adam Y.

Good afternoon Joe, The cone is there to direct the top onto the stainless rod. sounds like you are missing the clip for the handle. If you look up into the lid you will notice there should be a clip that holds the handle into the lid. Here is a link to a handle kit Cone Kit, Star Clear Plus (CX900DA)
 Reply


?     Asked on 9/26/2016 by Bill Hoover

Could a missing guide cone on my star clear plus filter allow dirt back into my pool.
 Reply

A  Answered on 9/27/2016 by InyoPools Product Specialist Stacey M.

Hello Bill, A missing part would be allowing dirt back in your pool.
 Reply


?     Asked on 12/18/2015 by Maureen Hinsey

My filter is missing the guide cone. What holds this in place? Do I need other parts to secure inside the lid?
 Reply

A  Answered on 12/18/2015 by InyoPools Product Specialist Lennox H.

Hi Maureen, The Guide Cone simply slides into the center of the Filter Lid keeping it in place, no other parts is needed to secure it inside the lid.
 Reply


?     Asked on 8/29/2015 by Luz

I was cleaning the pool filter and when I was going to put it, I don't know if this part goes at the bottom or on top of the filter
 Reply

A  Answered on 8/31/2015 by InyoPools Product Specialist Lennox H.

Hi Luz, The Guide Cone (CX900D) goes into the center of filter lid.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)