O-ring Od 11/16" (112)

Part # 3262-08

By Parco

  4.67 Average  

Details

Top

Part # 3262-08

Manufacturer Code 112

Dimensions 0.7" X 0.14"

Alternate Part #'s 017437, 11206, 1137, 1269009, 171051005, 171851306, 192115, 201010, 205104, 2112, 273011, 29113, 3081001, 352701812, 39960148, 47011200, 47011200R, 510031, 6020006, 8050111, 8050112, E45, LE45, LLE45, O39, P40, P6020, P62112, POL2013293, U9158, U9359

Product Description

11/16" black rubber o-ring used for many different brand pool pumps, valves, and filters.  See Parts tab above for complete list of equipment.

 

Top

?     Asked on 8/6/2017 by

How many in a bag

A     Answered on 8/7/2017 by InyoPools Product Specialist Lennox H.

Hi. This o-ring is not sold in a pack, it's a single o-ring. 

?     Asked on 6/5/2017 by Joseph Solomon

is this the o-ring for the bottom of the tc300 manifold. Thank you

A     Answered on 6/9/2017 by InyoPools Product Specialist Lennox H.

Hi, Joseph. This o-ring does not go to the bottom manifold of the TC300 unit, p/n 17022868R according to the Jacuzzi Tri-Clops Cartridge Filter parts diagram.

?     Asked on 5/17/2015 by terry bingaman

I cannot see where this small o-ring is used on a Anthony push-pull valve.This valve has a 2in valve CAP 01775 attached to it. It appears that this small o-ring OD 11/16 part no 3262.08 is inserted inside what appears to be groove. I am getting leakage out of this cap coming thru the 1/2 in hole. Question is does the o-ring fit into the cap?

A     Answered on 5/19/2015 by InyoPools Product Specialist Patrick P.

Yes this o-ring would go into the cap of the Anthony valve.

?     Asked on 5/16/2015 by

Where does this oring fit? Does it fit inside the top cap ?

A     Answered on 5/17/2015 by InyoPools Product Specialist Patrick P.

This particular o-ring is used on many different products and in many different locations. Can you supply the product the location of the o-ring that you are needing to replace and then we can let you know the proper o-ring for your needs.

Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Pliers

Small water leak at the bottom of my pump housing.

Written on 5/30/2018 by Guest

Turned off pump and removed old plug. Coated new o ring with grease and installed on plug and screwed back in. Restarted the pump and the leak was healed, no more bubbles in the top.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Wrench Set

Leak around top of pump

Written on 4/17/2018 by Guest

I had actually ordered this with the gasket. Not good with using tools at all but I had a leak I was hoping I could fix at the top of the pool pump. Instructions were easy and I was able to put both parts on.

Were these instructions helpful? 
 

Top

Review Summary

  (Average 4.67 out of 5 stars)
6 Rating
5 star:
 
(5)
4 star:
 
(0)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews





Top