$6.31

Qty:

By Praher


Details

Top

Part # 4600-1151

Manufacturer Code E-7-S2

Dimensions 7" x 1/8"

Alternate Part #'s 14971-SM20E7, 14971SM20E7, 261, 271151, 432020, 4600-1151, 4659-38A, 516138, 805-0261, 873-E7S2, 90-423-5261, APCO2465, E7S2, O-479, O479, PEN271151, PRE7S2, SPP-2610, AEQO479

Product Description

Valve cover o-ring used on a number of 2" multiport valves from Pentair, Sta-Rite, Jandy / Zodiac, Jacuzzi and others.

Serves as a seal between the valve cover and valve diffuser.

Top

?     Asked on 6/16/2015by Reed

I need 2 o rings for the model SM20-2 multivalve but I dont see the correct one shown in pictures. The one I need is about 2.5 to 3 inches in diameter and about the thickness of a cooked piece of spaghetti. The ones you have displayed are the slightly smaller and thicker diameter and very wide diameter o ring for the interior of the valve. Please advise. Regards, Reed
 Reply

A  Answered on 6/18/2015 by InyoPools Product Specialist Lennox H.

Red, The Valve Adapter O-ring (4620-529) that goes on the bulkhead may be what your looking for.
 Reply


?     Asked on 11/2/2016by Nick Guerra

I have the Purex Triton Model TM-22. I am looking for the o-ring that goes underneath the top of the cover. Will this o-ring work?
 Reply

A  Answered on 11/2/2016 by InyoPools Product Specialist Adam Y.

Good Morning Nick Guerra, The model number you gave us is for the multi-port. Is your filter a sand or cartridge and do you have the series or sqft or the model number of the filter itself?
 Reply


?     Asked on 11/21/2016by jorge

hi...i need to replace the spyder gasket as well as the o-ring cover for a valve purex triton (filter) model SM-20-3 ....what do you recommend me to buy?? I will need the silicon tube also....
 Reply

A  Answered on 11/22/2016 by InyoPools Product Specialist Adam Y.

Good morning Jorge, You are looking for PacFab MPV 2" Tune Up Kit (NO SPRING) - APCK1069
 Reply


?     Asked on 11/10/2018by VASANT

I have the PENTAIR TOPVALVE Model SM-20-3. I am looking for the o-ring that goes underneath the top of the cover. Will this o-ring work?
 Reply

A  Answered on 11/19/2018 by InyoPools Product Specialist Hector F.

Yes, this is the correct lid o ring for your model valve. 
 Reply


?     Asked on 4/28/2020by bob wickizer

I have a sta rite 182010200 Which O-ring fits it? 5.5" 4600-1173 for $41.99 or the 7" 4600-1151 for $4.49 ??
 Reply

A  Answered on 4/28/2020 by InyoPools Product Specialist Patrick P.

Hi Bob, You can use this 4600-1151 o-ring for $4.49
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

Air in the basket

Written on 5/25/2020 by Guest

Remove cover & replace gasket

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.5  out of 5 stars)
4 Rating
5 star:
 
(2)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews