Part # 6223-82
Manufacturer Code HAXPSA1930
Alternate Part #'s HAXPSA1930, 47-150-1824, HAY-151-1566, HAYHAXPSA1930, HPPHAXPSA1930
H-Series Pressure Switch Assembly - HAXPSA1930
Is this product what is called a water pressure switch.? ais it for a Hayward Mdl#h400idl2?
Reply
Yes this would be considered a water pressure switch to some. Also it is the correct replacement for your heater.
Reply
Wiil this part keep the hearted from starting up?
Reply
Yes a bad pressure switch would prevent the heater from starting. Other common problems which would casuse the heater not to start up would be a dirty filter or a dirty pump basket so you may want to check these as well.
Reply
my heater will pop and shoot warm burst of water then a cold blast of water. is this a bad pressure switch?
Reply
Bob, Your problem could be more than a bad pressure switch, I would recommend calling Hayward at 908.355.7995 or have a Service Tech take a look at your unit.
Reply
Range of pressure switch is .5 to 5. What is correct setting for a 2 pump, 365 gallon spa?
Thanks
Reply
Hi, David. The setting will be based on the flow rate of the pump. The adjustment will have to be made as the pump is running.
Reply
My hayward H series heater will turn on for 2-3 seconds then turn off .I back washed several times clean pool filters ,cleaned connections.to no avail.
Reply
Hi, Edward. I would recommend that you check and test all the safeties include the water pressure switch. If those are good, check the gas valve.
Reply
