By Pentair Pool Products
Part # 4020-06
Manufacturer Code 08650-0025
Dimensions 10-3/8" OD x 2" height x 8-3/8" ID
Alternate Part #'s 086500025, 251022, STA251022, 51-102-1217, PEN08650-0025, PEN086500025
SwimQuip White U3 Skimmer Deck Ring
Measures 10-3/8" OD by 2" height by 8-3/8" ID
I need a grate and collar to replace my old SwimQuip U3 Sta-Rite that is from 1998. The rough opening in my concrete pool deck is 10" diameter, and the current grate / lid is 9 7/8", with the collar inside diameter at 8 3/8"...do you have replacement parts that will fit these dimensions?
thanks
Reply
Hi Greg,There is the only one size collar available in three different colors for the SwimQuip U-3 skimmer. We do not have the exact measurements but this collar will work.
Reply
I have a Swim-quip WC27-S2 lid and assuming the rest of the skimmer is also the same manufacturer. The model numbers under the ring say, NSF Certified models, 08650-1403, 08650-1404 and 08650-2403, 08650-2404.
My questions are, does this ring just snap in place or is it poured in when the concrete decking is applied?
If a snap in place, does the skimmer ring (08650-0025) replace the current one? Also, the cover would be the (08650-0058) in white to mate up with this particular ring?
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Sta-Rite U-3 Skimmer Collar Ring, White - 08650-0025")
Hello Bonn. The SwimQuip Skimmer Ring slides into the skimmer housing and is held in place with a friction fit, with no adhesive or silicone. The SwimQuip Skimmer Ring part number 08650-0025 would be the correct part number for the replacement ring (white). The SwimQuip Skimmer Cover part number 0860-0058 would be the correct part number for the replacement Skimmer Cover (white). Attached please find an exploded parts diagram for the SwimQuip U-3 Skimmer (complete) for reference. Sta-Rite / SwimQuip U-3
Reply
