Terminal Board - 626536-001

$11.99

IN STOCK

Part # 5271-22

By Century Motors

  5 Average  

Details

Top

Part # 5271-22

Manufacturer Code 626536-001

Alternate Part #'s 626531, 626536-001, 626536001, 35-125-2042, AOS626536-001

Product Description

Terminal Board - 626536-001

Top

?     Asked on 2/12/2018 by Iain Ferguson

I purchased a new terminal board from you to replace one that had burnt ... thank you. Is there a wiring diagram that I can use when I replace the terminal block? (It's 230V.)
 Reply

A  Answered on 2/12/2018 by InyoPools Product Specialist Lennox H.

Hi, Iain. You can use our How To Replace the Terminal Board on an AO Smith Motor guide for instructions.
 Reply


?     Asked on 8/30/2017 by George

Since the little black cube that switches voltage is no longer available and the cube is broken in 5 pieced Can I still leave the black wire attached and it does not appear the white wire was connected to anything. Can I just tape off the white wire or was the black and white wire attached together some way. There does not appear to be a spade connector for the white wire. I am running 120v not 220v.. If this will not work is there a replacement part it is a Hayward C48J2N131B1 - Thanks
 Reply

A  Answered on 8/31/2017 by InyoPools Product Specialist Megan C.

George, You can connect the wires directly to the terminal board. If you are running 115v, the white wire would be connected to the top terminal. The only time the white wire would not be connected would be if you were running 230v.
 Reply

  • Commented on 4/8/2020 by Product Owner

    I have the same question, but I am running 230v, and I currently have the black voltage switch. I am running red, black and green (ground) wires from my harness into the motor. How do I connect to the 230v; I see a terminal there but how does it connect to my harness

     Reply


?     Asked on 4/9/2017 by julytza

Hello does this terminal board fit into a flotec water pump?
 Reply

A  Answered on 4/11/2017 by InyoPools Product Specialist Lennox H.

Hi, Julytza. In order to determine if this terminal board will fit your Flotec pump motor, we will need the  motor specs, like the MOD, PART and or CAT number.
 Reply


?     Asked on 6/8/2016 by john faulls

along with my termial board the black cube was damaged. Is the black cube available.
 Reply

A  Answered on 6/18/2016 by InyoPools Product Specialist Alex V.

John, Unfortunately, the black cube is not available for purchase.
 Reply


?     Asked on 6/7/2016 by john

my black cube also was damaged when wire shorted. can i get a new black cube
 Reply

A  Answered on 6/12/2016 by InyoPools Product Specialist Lennox H.

Hi John, If you're referring to the part that switches the voltage of the motor, that part is not available as a replacement part.
 Reply


?     Asked on 3/18/2016 by Paul

I hope it's connected right since my old board was arching and melted but now it just turns at a low rpm
 Reply

A  Answered on 3/21/2016 by InyoPools Product Specialist Lennox H.

Hi Paul, Check to see if the motor is wired correctly and if it is then something else is wrong with the motor.
 Reply


?     Asked on 8/16/2015 by MIKE

can you run the pump motor with out the terminal board it is cracked I want to connect the wires with connecters for 115 volts what ? wires go together. THANK YOU.
 Reply

A  Answered on 8/18/2015 by InyoPools Product Specialist Lennox H.

Hi Mike, I would not recommend wiring the motor without a Terminal Board.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
4 Rating
5 star:
 
(4)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews