Washer, Valve Spring (e-8-s1)

$6.99

IN STOCK

Part # 4600-1160

By Praher

  5 Average  

Details

Top

Part # 4600-1160

Manufacturer Code E-8-S1

Dimensions 1-5/8" x 1-1/4"

Alternate Part #'s 1118, 14426605R, 14971SM10E8, 27-105-1110, 271160, 730000E8T1, E8S1, PCPE-8-S1, PRE8S1

Product Description

Valve spring washer used in various top and side mount filter valves including Pentair / Praher, Sta-Rite, Jacuzzi, Waterway and Jandy.

Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers, Socket Set, Wrench Set

1     0

Multiport Valve was working badly and not turning easy

Written on 8/10/2020 by Guest

Depressured the system with pump off. Removed the pin for the handle and took off the top of the mp valve by removing the screws. Disconnected the diverter and replaced the shaft gaskets, weak spring, washers and re assembled.

Also replaced the spider gasket. Reinstalled the top of the multiport valve and closed the pressure relief on the filter and started the pump verified no leaks.

Difficulty-Overall just need to verify that you don't install the handle backwards, its a 50/50. Mark it so you dont make this mistake as the top of the valve has an indicator not aware of that on the diverter.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
4 Rating
5 star:
 
(4)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews