$970.99
Model # 2520-004
Manufacturer Code 82-760-P
Alternate Part #'s 82-760-P, 82760P, DJC-45-564, PV82760P
INYO # 2520-004 POLARIS # 82-760-P THIS IS THE POLARIS AUTOCLEAR PLUS COMPLETE SALT CELL THIS INCLUDES THE COMPLETE ELECTRODE AND HOUSING WITH 12 FT CORD ALSO INCLUDES THE FLOW SWITCH WITH CABLE, (2) UNION END PIECES, END UNION NUTS, UNION O-RINGS AND (2) 2" X 1-1/2" REDUCER BUSHINGS EACH END OF THE CELL HAS MALE UNION THREADS (ACTUAL THREAD OUTSIDE DIAMETER IS ABOUT 3") THE END UNIONS ARE 2" SLIP (ACTUAL INSIDE DIAMETER IS 2-3/8") THE REDUCER BUSHINGS WILL GLUE INSIDE OF THESE FOR USE WITH 1-1/2" PVC PIPE THERE ARE 13 PLATES IN THIS ELECTRODE INSIDE THE CELL THE CORD IS 12 FEET LONG AND HAS A SPECIAL 4 PIN MALE CONNECTOR ON THE END DIMENSIONS: TOTAL LENGTH: 10" (NOT INCLUDING UNIONS) WIDTH: 3-3/4" HEIGHT: 3-7/8"
This is the salt machine I have,' Polaris AutoclearPlus" If it is no longer available what will I do? Can I find something that will change out that will work?
Reply
Hi Sandra, You will have to replace the complete system, you can chose from our selection of our Inground Pool Salt Systems.
Reply
My Polaris Auto Clear Plus keeps getting a 91 code which means low salt , salt levels are good ( per salt dip stick) PH good, new water stabilized) good pressure, it keeps going into the 91 low salt add salt, I don't want to add anymore salt because of the dip stick reading is good
Reply
Hello, Don.This may occur when the cell needs to be replaced or if there is an issue with the main PCB or it needing replacement. The Polaris AutoClear is no longer manufactured and is limited to the amount of parts that are still available to order. Here is a link to How To Know When a Salt Cell is Bad - General.Salt Chlorine Generators: http://www.inyopools.com/sanitizers_salt_generator.aspx
Reply
