Strainer Tank, Model E71 (2901110100b)

$85.99

IN STOCK
FREE SHIPPING

Part # 5140-77

By Speck Pumps


Details

Top

Part # 5140-77

Manufacturer Code 2901110100B

Dimensions 10" L x 8.25" W x 6.75" D

Alternate Part #'s 2901110100B

Product Description

Your Source for Swimming Pool & Spa Parts - INYOpools.com

Top

?     Asked on 6/2/2020 by Jacob Wight

I have a proline PE71 and the order number is 2901110100. My order # does not have a B at the end of it. Will this part still work?
 Reply

A  Answered on 6/10/2020 by InyoPools Product Specialist Hector F.

Yes, this strainer tank will work with your model PE71 pool pump. 
 Reply


?     Asked on 8/21/2018 by Pravi

I just replaced the ORing&shaft seal but pump is still leaks where 2901110100B connects to motor housing. One screw thread has worn out on 2901110100B. Is there a way to fix the thread so that i can tighten the screw. Also when i replaced the Oring, i did not lubricate it what lubricant can i use to lubricate it to put it back. Since the screw hole is of plastic, i am scared that i might rip apart couple of more threads when i remove it again.Thanks in advance I would appreciate any suggestions.
 Reply

A  Answered on 9/1/2018 by InyoPools Product Specialist Lennox H.

Hi, Pravi. Unfortunately, the threads are unable to be repaired, you will have to replace it. The Magic Lube O-ring Lubricant is what you'll need for all your o-ring for your pool and spa equipment. 
 Reply


?     Asked on 6/26/2018 by

Hello, Will this work with a horizontal discharge PE71-II-H?
 Reply

A  Answered on 6/26/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, this Strainer Tank - 2901110100B will fit the PE71-II-H model pump.
 Reply


?     Asked on 5/20/2018 by Jim

I just replaced the Speak Pump Strainer and started the pump and it's leaking where the replacement part 2901110100B to the motor housing I tightened the screws and made sure the o-ring was in place. Can I put a sealant on the outside as it is spraying a fine mist. I would take the part apart an look at but removing the screws is easy but tightening them up is difficult I would appreciate any suggestions. The leak is small spray now but I want to make sure it doesn't get worse
 Reply

A  Answered on 5/26/2018 by InyoPools Product Specialist Lennox H.

Hi, Jim. If you didn't replace and or lubricate the Housing O-ring - 2901141200, I would recommend that you do. That will ensure that it doesn't get worst. Using a sealant is like putting a band-aid on the issue. 
 Reply


?     Asked on 6/2/2017 by Dennis White

Are you able to ship parts overnight
 Reply

A  Answered on 6/3/2017 by InyoPools Product Specialist Hector F.

Yes, but it will depend on the day of the week that you place the order and if the item itself is available for an expedited shipping method. You will know once you are placing the order and have the shipping methods options on your screen. Please view the shipping policy here.
 Reply


?     Asked on 5/31/2017 by Dominic

Will this part work with the speck pumps E71-II?
 Reply

A  Answered on 6/3/2017 by InyoPools Product Specialist Lennox H.

Hi, Dominic. Yes, this Strainer Tank will fit the Speck E71-II pump.
 Reply


?     Asked on 5/26/2016 by

Will this work on a PE -71 pump
 Reply

A  Answered on 5/27/2016 by InyoPools Product Specialist Joe S.

Good day, Yes the Strainer Tank, Model E71 (2901110100b) will work on that pump.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)